Performance evaluation of mining equipment in surface coal mine using reliability analysis

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN
  • ,IN
  • ,IN

DOI:

https://doi.org/10.18311/jmmf/2021/30119

Keywords:

Reliability analysis, failure rate and MTBF

Abstract

This article deals with reliability analysis of mining equipment such as shovels and dumper in a surface coal mine at The Singareni Collieries Co. Ltd., Telangana, by using the RBD and Markov model. First, the method is to obtain the MTBF and failure rate of the individual subsystem of a shovel and each dumper using RBD. Second, the attribute of the reliability-based Markov model is dissected. The method is shown to be an effective technique to obtain the reliability of the whole system of shovel and dumper during the working period. Then, the mathematical model has written to obtain the reliability of the whole system of the shovel and the dumper is described along with its validation. The outcome shows that the reliability with a time of the entire framework is the unwavering quality incorporated of subsystems and can be treated as a factor for the optimized process of availability of the same.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-04-28

How to Cite

N.S., H. K., John, R. P., R, P. C., S.G, S. K., Murthy, N., & T, S. (2022). Performance evaluation of mining equipment in surface coal mine using reliability analysis. Journal of Mines, Metals and Fuels, 69(12A), 296–304. https://doi.org/10.18311/jmmf/2021/30119
Received 2022-04-28
Accepted 2022-04-28
Published 2022-04-28

 

References

Vrignat, P., Avila, M., Duculty, F., Aupetit, S., Slimane, M., and Kratz, F. (2012): “Maintenance policy: Degradation laws versus hidden Markov model availability indicator.” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 226(2), 137–155.

Samanta, B., Sarkar, B., and Mukherjee, S. K. (2001): “Reliability analysis of shovel machines used in an open cast coal mine.” Mineral Resources Engineering, 10(2), 219–231.

Roche-Carrier, N. La, Dituba Ngoma, G., Kocaefe, Y., and Erchiqui, F. (2019): “Reliability analysis of underground rock bolters using the renewal process, the non-homogeneous Poisson process and the Bayesian approach.” International Journal of Quality and Reliability Management, 37(2), 223-242.

Morad, A. M., Pourgol-Mohammad, M., and Sattarvand, J. (2014): “Application of reliabilitycenteredmaintenance for productivity improvement of open pit mining equipment: Case study of Sungun Copper Mine.” Journal of Central South University, 21(6), 2372–2382.

Tuncay, D., and Demirel, N. (2017): “Reliability analysis of a dragline using fault tree analysis.” Madencilik, 56(2), 55–64.

Gustafson, A., Lipsett, M., Schunnesson, H., Galar, D., and Kumar, U. (2014): “Development of a Markov model for production performance optimisation. Application for semi-automatic and manual LHD machines in underground mines.” International Journal of Mining, Reclamation and Environment, 28(5), 342–355.

Gustafson, A., Schunnesson, H., and Kumar, U. (2015): “Reliability analysis and comparison between automatic and manual load haul dump machines.” Quality and Reliability Engineering International, 31(3), 523–531.

Sarkhel, S., and Dey, U. K. (2015): “Reliability modelling of side discharge loader for availability estimation and maintenance planning in underground coal mines.” International Journal of Scientific & Engineering Research, 6(9), 847–854.

Barabady, J., and Kumar, U. (2008): “Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran.” Reliability Engineering and System Safety, 93(4), 647–653.

Soltanali, H., Garmabaki, A. H. S., Thaduri, A., Parida, A., Kumar, U., and Rohani, A. (2018): “Sustainable production process: An application of reliability, availability, and maintainability methodologies in automotive manufacturing.” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 1-16.

Kumar, U., Klefsjö, B., and Granholm, S. (1989): “Reliability investigation for a fleet of load haul dumpmachines in a Swedish mine.” Reliability Engineering and System Safety, 26(4), 341–361.

Famurewa, S. M., Asplund, M., Rantatalo, M., Parida, A., and Kumar, U. (2015): “Maintenance analysis for continuous improvement of railway infrastructure performance.” Structure and Infrastructure Engineering, 11(7), 957–969.

Mohammadi, M., Rai, P., and Gupta, S. (2016): “Improving productivity of dragline through enhancement of reliability, inherent availability and maintainability.” Acta Montanistica Slovaca, 21(1), 1-8.

Pandey, P., Mukhopadhyay, A. K., and Chattopadhyaya, S. (2018): “Reliability analysis and failure rate evaluation for critical subsystems of the dragline.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(2), 1-11.

Fan, Q., and Fan, H. (2015): “Reliability analysis and failure prediction of construction equipment with time series models.” Journal of Advanced Management Science, 3(3), 203–210.

Esmaeili, M., Bazzazi, A. A., and Borna, S. (2011). “Reliability analysis of a fleet of loaders in sangan iron mine.” Archives of Mining Sciences, 56(4), 629–640.

Harish, K., Choudhary, R. P., & Murthy, C. S. N. (2018): “Reliability-based preventive maintainability analysis of shovel-dumper system in surface coal mine using ANN and isograph reliability workbench.” Mathematical Modelling of Engineering Problems, 5(4), 373-378.

Smith, J. U. M., Billington, R., and Allan, R. N. (1994). “Reliability evaluation of engineering systems,” New York: Plenum press.

Majid MAA, Nasir M (2011): “Multi-state system availability model of electricity generation for a cogeneration district cooling plant.” Asian Journal of Applied Sciences, 4(4), 431–438

Kumar, G., Jain, V. and Gandhi, O. P. (2018): “Availability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval.” Journal of Industrial Engineering International, 14(1), 119-131.

W. M. Hirsch, M. Meisner and C. Boll. (1968): “Cannibalization in multicomponent systems and theory of reliability.” Naval Research Logistics, 15(3), 331-360.

Yingkui, G., & Jing, L. (2012): “Multi-state system reliability: A new and systematic review.” Procedia Engineering, 29, 531-536.

Dhillon, B. S. (2008): “Mining equipment reliability, maintainability, and safety”. London, Springer.

Blischke, W. R. and D. N. P. Murthy (2003): “Introduction and Overview”. Case Studies in Reliability and Maintenance, John Wiley & Sons, Inc.: 1-34.

Dong, M., and He, D. (2007): “Hidden semi-Markov model-based methodology for multi-sensor equipment health diagnosis and prognosis.” European Journal of Operational Research, 178(3), 858–878.

Amini Khoshalan, H., Torabi, S. R., and Maleki, D. (2015). “RAM analysis of hydraulic system of earth pressure balance tunnel boring machine.” Indian Journal of Science and Technology, 8(28), 1-9.

Jakkula, B., Mandela, G. R. and Chivukula, S. M. (2020): “Application ANN tool for validation of LHD machine performance characteristics. Journal of the Institution of Engineers (India): Series D, 1-12.

Arzaghi, E., Abaei, M. M., Abbassi, R., Garaniya, V., Chin, C., and Khan, F. (2017): “Risk-based maintenance planning of subsea pipelines through fatigue crack growth monitoring.” Engineering Failure Analysis, 79, 928–939.

Agrawal, A. K., Murthy, V. M. S. R., and Chattopadhyaya, S. (2019): “Investigations into reliability, maintainability and availability of tunnel boring machine operating in mixed ground condition using Markov chains.” Engineering Failure Analysis, 105, 477–489.

Venkatesha, B. K., and Saravanan, R. (2020): Effect of Cenosphere Addition on Mechanical Properties of Bamboo and E-Glass Fiber Reinforced Epoxy Hybrid Composites. International Journal of Vehicle Structures and Systems, 12(4), 447–451. https://doi.org/10.4273/ijvss.12.4.18

Venkatesha, B. K., Pramod Kumar, S. K., Saravanan, R. and Ishak, A. (2020): Tension Fatigue Behaviour of Woven Bamboo and Glass Fiber Reinforced Epoxy Hybrid Composites. IOP Conference Series: Materials Science and Engineering, 1003 0120187 https://doi.org/10.1088/1757-899x/1003/1/012087

Venkatesha, B. K., Saravanan R and Anand Babu, K. (2021). Effect of Moisture Absorption on Woven

Bamboo/Glass Fiber Reinforced Epoxy Hybrid Composites, Materials Today Proceedings, 45 (part 1),

-221. https://doi.org/10.1016/j.matpr.2020.10.421