Evaluation of copper chill on tribological behaviour of LM13/ZrSiO4/C hybrid metal matrix composites

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN

DOI:

https://doi.org/10.18311/jmmf/2021/30143

Keywords:

Dual reinforcement, copper chill, stir casting, tensile strength.

Abstract

Composites place a vital role in applications of material science I,e aerospace, automobile, marine, etc... Dual reinforcement composites are a trending research area in the field of metal matrix composites. In this research article dual reinforcement i.e zirconium silicate and carbon are added to molten LM13 using the stir casting process in terms of (3+3), (6+3), (9+3) and (12+3) wt.% respectively using copper as a chill kept toward one end. Tensile, hardness, and microstructural studies are done on the composite specimen at the chill end and non-chill. It is found an increase in reinforcement and chilling effect increases the properties of the composite.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-04-28

How to Cite

Ravitej, Y. P., Mohan, C. B., & Ananthaprasad, M. G. (2022). Evaluation of copper chill on tribological behaviour of LM13/ZrSiO<sub>4</sub>/C hybrid metal matrix composites. Journal of Mines, Metals and Fuels, 69(12A), 142–146. https://doi.org/10.18311/jmmf/2021/30143
Received 2022-04-28
Accepted 2022-04-28
Published 2022-04-28

 

References

J. K. Chaurasia, P. Patel, and M. Muthuchamy, (2016): “Investigation of Zirconium Silicate and Zirconium oxide reinforcement in Aluminium 6061 metal matrix/ : A comparative study,” no. February.

K. S. Sucitharan, (2013): “Wear Behaviour of Al6063- Zircon Sand Metal Matrix Composite,” IOSR J. Eng., vol. 03, no. 02, pp. 24–28, DOI: 10.9790/3021-03232428.

A. B. Mhaske and P. K. R. Madavi, (2018): “Experimental Investigation and Optimization of Wear Properties of Aluminum Alloy LM30 Composite with Zircon Powder as Reinforcement,” no. July, pp. 2062– 2065.

S. Naveen Kumar et al. (2021): “Fabrication and characterization of hardness and microstructure of large-sized Al2014-SiC composite,” Mater. Today Proc., DOI: 10.1016/j.matpr.2021.05.398.

R. Prem Chand et al., (2021): “Characterization of banana and E glass fiber reinforced hybrid epoxy composites,” Mater. Today Proc., DOI: 10.1016/j.matpr. 2021.05.402.

V. Deepak, O. Abhilash, Y. P. Ravitej, Veerachari, and L. Abhinandan, (2021): “Design and development of a progressive tool for mold tag,” AIP Conf. Proc., vol. 2316, no. February, DOI: 10.1063/5.0038385.

D. Sandeep et al., (2021): “CFD simulation of transonic turbulent flow past NACA 0012 aerofoil,” AIP Conf. Proc., vol. 2316, no. February, DOI: 10.1063/5.0036890.

Y. P. Ravitej, V. Swaroop, S. Ramesh, H. Adarsha, Veerachari, and Nischith, (2018): “Finite element analysis of mild steel - Rubber sandwich composite material,” IOP Conf. Ser. Mater. Sci. Eng., vol. 376, no. 1, DOI: 10.1088/1757-899X/376/1/012040.

S. Sameer and V. Banda, (2018): “Bending Stresses and Wear Reduction in an Involute Spur,” vol. 5, no. 3, pp. 432–436.

J. J. R. J. Jenix Rino, (2013): “Properties of Al6063 MMC Reinforced With Zircon Sand and Alumina,” IOSR J. Mech. Civ. Eng., vol. 5, no. 5, pp. 72–77, DOI: 10.9790/1684-0557277.

S. Ahamed, J.D. Roshan, and P.C. Shilpa, (2019): “Aluminum-7075 Alloy Reinforced With Zirconium Silicate ( ZrSiO 4 ) Particulates,” pp. 1314–1320.

B. G. Jayaraja, P. Mathivanan, and M. J. Monish, (2018): “Testing and Analysis of Mechanical Properties of AL-ZrSiO4 C-Hybrid Nano Composites,” Int. Conf. Aeronaut. Astronaut. Aviat., no. April, pp. 27–32.

R. Nateriya, S. K. Patel, and G. Dixit, (2017): “Microstructural and Erosive Wear Behaviour on Coarse Silica Sand of Dual Reinforced Particle (DRP) LM-13 Alloy Composites,” Mater. Today Proc., vol.4, no. 2, pp. 3431–3440, DOI: 10.1016/j.matpr.2017.02.232.

J. Hemanth, (2009): “Development and property evaluation of aluminum alloy reinforced with nano- ZrO2 metal matrix composites (NMMCs),” Mater. Sci. Eng. A vol. 507, no.1, pp.110-113, DOI: https://doi.org/ 10.1016/j.msea.2008.11.039.

Nithyanand, “Effect of chills on tribological behaviour of aluminum garnet carbon hybrid composites,” ijemperd, vol.9, no.3.

Venkatesha, B. K. and Saravanan, R. (2020): Effect of Cenosphere Addition on Mechanical Properties of Bamboo and E-Glass Fiber Reinforced Epoxy Hybrid Composites. International Journal of Vehicle Structures and Systems, 12(4), 447–451. https://doi.org/10.4273/ ijvss.12.4.18

Venkatesha, B. K., Pramod Kumar, S. K., Saravanan, R. and Ishak, A. (2020): Tension Fatigue Behaviour of Woven Bamboo and Glass Fiber Reinforced Epoxy Hybrid Composites. IOP Conference Series: Materials Science and Engineering, 1003 (0120187). https:// doi.org/10.1088/1757-899x/1003/1/012087.