Performance and emissions analysis of diesel engine fuelled with exhaust gas energy preheated ROME biodiesel
Authors
-
,IN
K. Varadaraj -
,INN. Varun Kumar Reddy
-
,INH. Arun Kumar
-
,INR. Vinod
-
,INS. G. Sangashetty
-
,INN. R. Banapurmath
DOI:
https://doi.org/10.18311/jmmf/2021/30152Keywords:
Green matter, atomization, viscosity, biofuelAbstract
The crude oil resources are depleting as the days progress and biodiesel is an emerging substitute. But the usage of biodiesel is associated with fuel atomization problems. The prime cause is the high viscous nature of oils obtained from green matter. As we know that with increase in temperature of oil viscosity decreases. Current work deliberates the influence of preheating of biofuel on the engine output parameters. DI diesel engine fuelled with preheated biofuel blends result in increase in thermal efficiency and drop in HC, CO emissions, but the rise in peak cylinder temperature resulted in increase in NOx emissions.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
Accepted 2022-04-28
Published 2022-04-28
References
Mourad M., Noureldenn E. H. (2019): Benefits of exhaust gas energy for preheating biodiesel fuel to enhance engine emissions and performance. Journal of Mechanical and Energy Engineering, Vol. 3(43), No.2, pp. 157-168.
Reddy N, V. K., Sangashetty, S. G. and Banapurmath, N. R. (2019): Investigation of Influence of Injector Opening Pressure and Nozzle Geometry on the Performance and Emission Characteristics of DI Diesel Engine with CAOME. European Journal of Sustainable Development Research, 3(2),
“Standard Specification for biodiesel (B100) Blend stock for Distillate Fuels”, In Annual book of ASTM Standards, 1131-1136, west Conshohocken, PA: American society for testing and materials. d7651-02, 2009.
Zhuang Y., Hong G., (2014): “Effects of direct injection timing of ethanol fuel on engine knock and lean burn in a port injection gasoline engine”, Fuel, 135, 27-37. https://doi.org/10.1016/j.fuel.2014.06.028.
Wei L., Yao C., Han G., Pan W., (2016): “Effects of methanol to diesel ratio and diesel injection timing on combustion, performance and emissions of a methanol port premixed diesel engine”, Energy, 95, 223-232. https://doi.org/10.1016/j.energy. 2015.12.020.
Cowan G., Bushe W.K., Hill P.G., Munshi S.R., (2004): “NOx reduction from a heavy-duty diesel engine with direct injection of natural gas and cooled exhaust gas recirculation (EGR), Proc. Imech E, Part D: J. Autom. Eng., 5(2), 175-191.
Huang Y., Hong G., Huang R., (2016): “Effect of injection timing on mixture formation and combustion in an ethanol direct injection plus gasoline port injection (EDI+GPI) engine”, Energy, 111, 92-103. https://doi.org/10.1016/j.energy.2016.05.109.
Wang Y., Zhao Y., Xiao F., Li D., (2014): “Combustion and emission characteristics of a diesel engine with DME as port premixing fuel under different injection timing”, Energy Conversion and Management, 77, 52- 60. https://doi.org/10.1016/j.enconman.2013.09.011.
V.S. Yaliwal, N.R. Banapurmath, N.M. Gireesh, P.G. Tewari, (2014): Production and utilization of renewable and sustainable gaseous fuel for power generation applications: a review of literature, Renew. Sustain. Energy Rev. 34, 608-627.
An H, Yang WM, Maghbouli A, Li J, Chou SK, Chua K J. (2013): Performance, combustion and emission characteristics of biodiesel derived from waste cooking oils. Appl Energy 2013; 112:493-9.
