Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN
  • ,IN
  • ,IN
  • ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/30683

Keywords:

Microstructure, mechanical and wear behaviour, composite technology, AL2024–B4C

Abstract

Metal matrix composite plays an important role in automobile and aerospace applications. Among all the metals, aluminium is considered as the lighter metal. In present investigation aluminium-2024 is considered as the base alloy and reinforced with boron carbide to increase its hardness. Aluminium metal matrix composite is obtained by combining different percentage of boron carbide particulates in the volume fraction 2.5 wt.% and 5 wt.%. Synthesis is done by stir casting technique and the characterization is carried out using scanning electron microscope. The properties of Al2024 reinforced with boron carbide is evaluated by using tensometer, pin on disc wear testing machine and vickers hardness tester. With the increase in the reinforcement high hardness, tensile strength and higher wear resistance is achieved. These types of MMCs are widely used in automobile and aerospace applications due to their great mechanical behaviours, low density, low factor of thermal expansion; corrosion resistance is better and increased wear resistance as compared to conventional metals and alloys. Improved mechanical property of these composites makes them very useful for various applications in many areas from technological point of view.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-07-12

How to Cite

Akanksh, V. N., Hegde, P., Siddharth, S., Manjunath, A. B., Siddaraju, C., & Nagaral, M. (2022). Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications. Journal of Mines, Metals and Fuels, 70(3A), 138–142. https://doi.org/10.18311/jmmf/2022/30683

Issue

Section

Articles
Received 2022-07-12
Accepted 2022-07-12
Published 2022-07-12

 

References

Prasad H Nayak, Srinivas, H. K, Madeva Nagaral. (2019): Characterization of tensile fractography of nano ZrO2 reinforced copper-zinc alloy composites. Frattura ed Integrity Strutturale (Fracture and Structural Integrity), 48, pp. 370-376.

Fazil, N., Venkataramana, V., Madeva Nagaral, Auradi, V. (2018): Synthesis and mechanical characterization of micro B4C particulates reinforced AA2124 alloy composites. International Journal of Engineering and Technology UAE, 7 (2.23), pp. 225-229.

Siddesh Kumar, N. G., Shivashankar, G. S., Basavarajappa, S., Suresh, R. (2017): Some studies on mechanical and machining characteristics of Al2219/n- B4C/MoS2 nano hybrid metal matrix composites. Measurement, 107, pp. 1-11.

Pathalinga Prasad, G., Chittappa, H. C., Madeva Nagaral, Auradi, V. (2019): Effect of the reinforcement particle size on the compressive strength and impact toughness of LM29 alloy-B4C composites. Structural Integrity and Life, 19, br. 3, pp. 231-236.

Pankaj R Jadhav, Sridhar, B. R., Madeva Nagaral, Jayasheel Harti. (2020): Mechanical behaviour and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites. Advanced Composites and Hybrid Materials, 3, pp. 114-119.

Ramesh, C. S., Noor Ahmed, R., Mujeebu, M. A., Abdullah, M. Z. (2009): Development and performance analysis of novel cast copper SiC-Gr hybrid composite. Materials and Design, 30, pp. 1957-1965.

Vijaykumar Hiremath, Dundur, S. T., Bharath, R. L., Rajesh, G. L., Auradi, V. (2014): Studies on mechanical and machinability properties of B4C reinforced 6061 aluminium MMC produced via melt stirring. Applied Mechanics and Materials, 592, pp.744-748.

Nishant Verma, Vettivel, S. C. (2018): Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composites. Journal of Alloys and Compounds, 741, pp.981-998.

Madeva Nagaral, Auradi, V., Parashivamurthy, K. I., Kori, S. A., Shivananda B. K. (2018): Synthesis and characterization of Al6061-SiC-Graphite composites fabricated by liquid metallurgy. Materials Toady Proceedings, 5, 1, pp. 2836-2843.

Jaswinder Singh, Amit Chuan. (2017): Fabrication characteristics and tensile strength of novel Al2024- SiC-red mud composites processing via stir casting route. Transactions of Nonferrous Metals Society of China, 27, pp. 2573-2586.

Beygi, H., Sajjadi, S. A., Zebarjad, S. M. (2016): Preparation and characterization of squeeze cast-Al– Si piston alloy reinforced by Ni and nano-Al2O3 particles. Journal of King Saud University – Engineering Sciences, 28 (2), 230-239.

Veereshkumar, G. B., Rao, C. S. P., Selvaraj, N. (2011): Mechanical and tribological behaviour of particulate reinforced aluminium metal matrix composites-a review. Journal of Minerals and Materials Characterization and Engineering, 10 (1), 59-91.

Madeva Nagaral, Deshapande, R. G., Auradi, V., Satish Babu Boppana, Samuel Dayanand, Anilkumar, M. R. (2021): Mechanical and Wear Characterization of Ceramic Boron Carbide-Reinforced Al2024 Alloy Metal Composites. Journal of Bio-and Tribo-Corrosion. 7(1): 1-12.

Kumar, K, Dabade, B. M., Wankhade, L. N. (2021): Influence of B4C and SiC particles on aluminium metal matrix composites: A brief overview. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr. 2020.12.697

Most read articles by the same author(s)

1 2 > >>