Excavator Selection Based on Muckpile Shape Parameters in Low Height Benches

Jump To References Section

Authors

  • Bhanwar Singh Choudhary
     Department of Mining Engineering, Indian School of Mines, Dhanbad 826004 ,IN

Keywords:

Muckpile Shape Parameters, Excavators, Cycle Time, Fragmentation.

Abstract

Selection of excavator by knowing the muckpile shape can help in increasing the productivity of the machine and the safety of the operator. The present study which was conducted in limestone quarries where major problems such as of improper fragmentation, poor wall control, and poor heave characteristics of the muckpile were observed. The results obtained from this study indicate that the muckpile shape parameters and size of fragmentation largely affects the excavator cycle time.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-15

How to Cite

Choudhary, B. S. (2022). Excavator Selection Based on Muckpile Shape Parameters in Low Height Benches. Journal of Mines, Metals and Fuels, 64(1-2), 19–22. Retrieved from https://informaticsjournals.com/index.php/jmmf/article/view/31454

Issue

Volume 64, Issue 1-2, January-February 2016

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

. Rai, P., Imperial, F.L. and Choudhary, B.S. (2006): A pattern for improvement, Quarry Management Journal, Special issue on “Drilling & Blasting”, Sept., pp: 23 -30.

. Choudhary B.S. and Rai P. (2013): Stemming Plug and Its Effect on Fragmentation and Muckpile Shape Parameters, Int. J. of Mining and Mineral Engineering, Vol. 4, No. 4, pp: 296-311.

. Jimeno, C.L., Jimeno, E.L. and Carcedo, F.J.A. (1995): Drilling and Blasting of Rocks, A.A. Balkema, Rotterdam, The Netherlands.

. Cunninham, C.V.B. (1996): Optical fragmentation assessment-A technical challenge, Proc. Measurement of Blast Fragmentation, Balkema, Rotterdam, pp:13-19.

. Thote, N.R. and Singh, D.P. (2003): Blast fragmentation size assessmen analysis for production blasts in Indian mining conditions. J. Explosives and Blasting Technique, Holmberg, pp: 459-466.

. Choudhary, B.S. (2011): Assessment of fragmentation in limestone quarry blasts, Ph.D. thesis, Banaras Hindu University, Varanasi, (Unpublished).

. Kanchibotla, SS. (2001): Optimum blasting? Is it minimum cost per broken rock or maximum value per broken rock? Procs. Explo-2001, Hunter valley NSW, pp: 35-40.

. Marton, A. and Crookes, R. (2000): A case study in optimizing fragmentation, The AusIMM Procs., No.1, pp: 35-43.

. Choudhary B.S. and Kumar P. (2013): Fragmentation vis-à-vis Excavator Cycle Time -A Case Study, Indian Mining and Engg. Journal, June, Vol.52, no.6, pp:1-17.

. Maerz, N.H., Franklin, J.A. (1987): Rothenburg, L. and Coursen, D.L., Measurement of rock fragmentation by digital photo analysis, 5th Int. Congr. Int. Soc. Rock Mech, pp: 687-692.

. Sanchidria J. A, Segarra, P.and Lopez, L.M. (2005): A practical procedure for the measurement of fragmentation by blasting by Image analysis. Rock Mech. Rock Engg, 39 (4), pp:359–382.