Development of a Handy Methodology for the Selection of Surface Miner in Varied Rock Mass Conditions for Mass Production of Coal and Limestone

Jump To References Section

Authors

  • A. Prakash
     Mine Subsidence, Central Institute of Mining & Fuel Research, Dhanbad ,IN
  • K. B. Singh
     Mine Subsidence, Central Institute of Mining & Fuel Research, Dhanbad ,IN
  • V. M. S. R. Murthy
     Dept. of Mining Engg., Indian School of Mines, Dhanbad ,IN
  • C. Kumar
     Dept. of Mining Engg., Indian School of Mines, Dhanbad ,IN
  • L. A. Kumaraswamidhas
     Department of Mining Machinery, Indian School of Mines, Dhanbad ,IN

Keywords:

Surface Miner, Intact Rock, Rock Mass, Rock Cuttability Index, Nomogram.

Abstract

A number of surface miners are being used in Indian mines and construction sites and represent a majority of their global population. The market is growing for these little marvels as several researchers are investigating their application in varied rock mass conditions. Small changes in intact rock and rock mass parameters can adversely affect the performance of mechanical excavators. Therefore, proper planning is required for the selection of surface miner of a desired specification under given geo-mining, intact rock and rock mass conditions. An approach for selection of suitable surface miner has been discussed in this paper. A study has been conducted on the performance of several models of surface miners deployed in Indian coal and limestone mines with special reference to rock properties. A range of rock properties are assessed and analysed with machine performance. Rock cuttability index (RCI) has been developed by taking into consideration all the critical parameters influencing machine performance. A nomogram has been framed for representing the rock cuttability index and production performance estimation. The study involves a comprehensive methodology for the selection of a suitable surface miner, through nomogram, by combining the relevant influencing parameters, namely, intact rock, rock mass, machine design and operating parameters for achieving a desired production.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-17

How to Cite

Prakash, A., Singh, K. B., Murthy, V. M. S. R., Kumar, C., & Kumaraswamidhas, L. A. (2022). Development of a Handy Methodology for the Selection of Surface Miner in Varied Rock Mass Conditions for Mass Production of Coal and Limestone. Journal of Mines, Metals and Fuels, 64(5), 112–117. Retrieved from https://informaticsjournals.com/index.php/jmmf/article/view/31478

Issue

Volume 64, Issue 5, May 2016

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

Prakash A., Murthy V.M.S.R., and Singh K.B., (2013): “Rock excavation using surface miners: an overview of some design and operational aspects,” Int. J. Min. Sci. Tech., vol. 23, pp. 33-40.

Ghose A.K., Schimm B., and Niyogi S., (2001): “New technology for surface mining in the 21st century – emerging role for surface miners,” Proceedings of Mine Planning and Equipment Selection 2001, Singhal and Singh, Eds. Oxford & IBH Publishing, New Delhi, pp. 269-276.

Prakash A., (2013): “A study into the influence of intact rock and rock mass properties on the performance of surface miners in Indian geo-mining conditions,” PhD Thesis, Mining Engineering, Indian School of Mines, Dhanbad.

Pradhan P., and Dey K., (2009): “Rock cutting with surface miner: A computational approach,” J. Eng. Tech. Res., vol. 1, no. 6, pp. 115-121, September.

Kramadibrata S., and Shimada H., (1996): “The influence of rock mass and intact rock properties on the design of surface mines with particular reference to the excavation of rock, Part-I, II and III” School of Civil Engineering, Curtin University of Technology.

Dey K., (1999): “Performance analysis of continuous surface miner in Indian surface coal mines - A case study,” M. Tech Dissertation, Department of Mining Engineering, Indian School of Mines, Dhanbad.

Goktan R.M., and Gunes N., (2005): “A semi-empirical approach to cutting force prediction for point-attack picks,” J. South Afr. Inst. Min. Met., vol. 105, pp. 257-263, April.

Bilgin N., Demircin M.A., Copur H., Balci C., Tuncdemir H., and Akcin N., (2006): “Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results,” Int. J. Rock Mech. Min. Sci., vol.43, pp. 139–156.

Murthy V.M.S.R., Kumar D., Jain P., and Dash A.K., (2009): “Development of a cuttability index of surface miner for performance prediction in different geomining conditions,” International symposium on Rock Mechanics & Geo-Environment in Mining & Allied Industries, BHU, Varanasi, 12-14 February, pp. 156-171.

Rzhevsky V., and Novik G., (1971): The physics of rocks. Moscow: MIR Publishers.

Prakash A., Murthy V.M.S.R., and Singh K.B., (2015): “A new rock cuttability index for predicting key performance indicators of surface miners, International Journal of Rock Mechanics & Mining Sciences,” vol. 77, pp. 339–347.