Forecasting Gas Emission Concentration Using Wavelet Decomposition and GM-ARIMA Model

Jump To References Section

Authors

  • Guo Zhiguo
     Faculty of Resources and Safety Engineering, China University of Mining and Technology (Beijing), Beijing 100 083 ,CN
  • Wu Bing
     Faculty of Resources and Safety Engineering, China University of Mining and Technology (Beijing), Beijing 100 083 ,CN
  • Ma Xiaolin
     Faculty of Resources and Safety Engineering, China University of Mining and Technology (Beijing), Beijing 100 083 ,CN
  • Chen Juan
     Faculty of Resources and Safety Engineering, China University of Mining and Technology (Beijing), Beijing 100 083 ,CN

Keywords:

Gas Concentration, Wavelet Theory, Decomposition Series, GM-ARIMA Model, Forecasting.

Abstract

In order to improve the prediction accuracy of the dynamic gas emission concentration in coal mining and heading working face, an approach based on wavelet decomposition and GM-ARIMA model prediction method was proposed. Firstly, this paper utilized the Grey Model GM (1, 1); the Autoregressive Integrated Moving Average Model ARIMA and the combination prediction model, GM-ARIMA, built by the method of variance reciprocal weighting to forecast the gas emission concentration respectively based on the gas concentration time series, and then employed wavelet theory to decompose the gas concentration time series into approximation sequence and detail sequence, after analyzing the characteristics of decomposition sequences respectively, matching methods-GM (1, 1) and ARIMA model, were employed to forecast the decomposed sub sequences. Then the final prediction values of the gas concentration were obtained through the reconstruction of sub sequences. Finally, it was verified by the engineering application and show that the average error rate of wavelet decomposition and GM-ARIMA prediction method was 3.64%, which provided a better fitting effect and a higher prediction accuracy compared with single model GM (1, 1); ARIMA and GM-ARIMA combination prediction model. It follows that this method is feasible and effective.

Downloads

Download data is not yet available.

Downloads

Published

2022-10-19

How to Cite

Zhiguo, G., Bing, W., Xiaolin, M., & Juan, C. (2022). Forecasting Gas Emission Concentration Using Wavelet Decomposition and GM-ARIMA Model. Journal of Mines, Metals and Fuels, 64(12), 612–618. Retrieved from https://informaticsjournals.com/index.php/jmmf/article/view/31624

Issue

Volume 64, Issue 12, December 2016

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

Wang, L., Cheng, Y. P., Wang, L., Guo, P. K. and Li, W. (2012): “Safety line method for the prediction of deep coal-seam gas pressure and its application in coal mines.” Safety Science, 50(3)5: 523-529.

Perrone, D. and Amelio, M. (2016): “Numerical simulation of MILD (moderate or intense low-oxygen dilution) combustion of coal in a furnace with different coal gun positions.” International Journal of Heat and Technology, 34(S2): S242-S248.

Li, R. Q., Shi, S. L., Wu, A. Y., Luo, W. K. and Zhu, H. P. (2014): “Research on prediction of gas emission based on self-organizing data mining in coalmines.” Procedia Engineering, 84(4): 779-785.

Ai, L., Cheng, J. T. and Xu, S. K. (2012): “Coal mine gas prediction model based on particle swarm optimization algorithm.” Advanced Materials Research, 546-547: 8-12.

Qiao, M. Y., Ma, X. P., Lan, J. Y. and Wang, Y. (2011): “Time-series gas prediction model using LS-SVR within a Bayesian framework.” Mining Science and Technology, 21(1): 153-157.

Fan, B. L., Bai, C. H. and Li, J. P. (2013): “Forecasting model of coalface gas emission based on LMD-SVM method.” Journal of Mining and Safety Engineering, 30(6): 946-952.

Liu, S. W., Qu, S. J., Li, J. L. and Dai, L. C. (2013): “Analysis on influence factors of top corner gas concentration and trend prediction.” Advanced Materials Research, 634-638(1): 3650-3654.

Tang, J., Jiang, C., Chen, Y., Li, X., Wang, G. and Yang, D. (2016): “Line prediction technology for forecasting coal and gas outbursts during coal roadway tunneling.” Journal of Natural Gas Science and Engineering, 34: 412-418.

Xu, S., Ba, J., Chen, X., Zheng, T., Yang, Y. and Guo, L. (2016): “Predicting strata temperature distribution from drilling fluid temperature.” International Journal of Heat and Technology, 34(2): 345-350.

Zhang, D. F. (2011): MATLAB wavelet analysis. Beijing, China: Machinery Industry Press, 87-99.

Cheng, H., Wei, F., Yang, T. and Zhao, Y. (2016): “Relation degree analysis of controllable factors in the bitumen foaming process,” International Journal of Heat and Technology, 34(3): 364-370.

Yuan, C., Liu, S. and Fang, Z. (2016): “Comparison of china's primary energy consumption forecasting by using ARIMA (the autoregressive integrated moving average) model and GM(1, 1) model.” Energy, 100(1): 384-390.

Zhu, X. and Shen, M. (2012): Based on the ARIMA model with grey theory for short term load forecasting model. International Conference on Systems & Informatics, 564-567.

Lin, W. R., Xu, B. and Wei, J. L. (2016): “Forecasting VaR with Combination of Factors and Variables Using High-Frequency Information.” Revista de la Facultad de Ingeniería, 31(5): 268-277.