Pipe Belt Conveyor: Cost Estimation Under Various Design Constraints
Authors
-
Professor, Mining Engineering, Indian Institute of Technology, Kharagpur ,IN
Jayanta Bhattacharya -
Masters Students Indian Institute of Technology, Kharagpur ,INShubham Gavel
-
Masters Students Indian Institute of Technology, Kharagpur ,INSachidanand Kumar
-
Project Manager, Indian Institute of Technology, Kharagpur ,INAjit Singh Choudhary
Abstract
No Abstract.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Vieroslav Molnar, Gabriel Fedorko, BeataStehlikova, Alena Paulikova, (2015): “Influence of tension force asymmetry on distribution of contact forces among the conveyor belt and idler rolls in pipe conveyor during transport of particulate solids”, Measurement, vol. 63, pp. 120.
Vieroslav Molnar, Gabriel Fedorko, BeataStehlikova, Peter Michalik, MelicharKopas, (2016): “Influence of tension and release in piped conveyor belt on change of normal contact forces in hexagonal idler housing for pipe conveyor loaded with material”, Measurement, vol. 84, pp. 21.
Vieroslav Molnár, Gabriel Fedorko, LuborHomolka, Peter Michalik, Zuzana Tuèková, (2019): “Utilisation of measurements to predict the relationship between contact forces on the pipe conveyor idler rollers and the tension force of the conveyor belt”, Measurement, vol.136, pp.735.
Kai Liu, (2006): “Application and Development of Pipe Belt Conveyor”, Coal Technology, 25(09): 19-21.
Maton A E., (1997): “Power and Capacity Review of Tubular Pipe and Trough Conveyor”, Bulk Solids Handing, 17(1):47-50
Zhiping Li (2003):, “Application of Pipe Belt Conveyor in Bulk Handling”, Electric Power Survey & Design, 1:48-52
Weigang Song, Ye Yu, (2005): “The Development and Critical Techniques of the Pipe Belt Conveyor”, Cement, 2005, 04:42-46
Yuefeng An, (2006): “Pipe belt conveyor”, S P & BMH Related engineering 2:39-42.
Gregory A Vaka, (1998): “Pipe Conveyor-Development and Advantages”, Bulk Solids Handling, 18(3):451-455
