Tribological Properties Study of Carbon Fabric/Epoxy Composites Reinforced by Nano-TiO2
Keywords:
Epoxy Resin, Carbon Fabric, Filling Modification, Friction and Wear.Abstract
The carbon fiber fabric as reinforcement, carbon fiber fabric/epoxy composites are prepared with epoxy resin as the binder system, and this composite material, to which is filled with nano TiO2 and nano modified composite materials are studied in the different loading conditions of friction and wear the effects of fillers, and the content of fillers on the tribological properties of the composites, the friction and wear mechanism are discussed. The results show that the nano TiO2 can achieve good antifriction reducing grinding effect, nano TiO2 and the optimum adding ratio of 3.0%. in this process, the wear of the composites by brittle spalling gradually turns to abrasive wear.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Anil K.V, Manasa D, (2015): “Characterisation of Pan Carbon Fabric/ Epoxy Resin for Structural Materials”, procedia materials Science, 10, 760-767.
Bing-li P, Ming-ke X, Hong-guang W, Er-lei Y, Ji-chun L, Yong-zhen Z, (2014): “Tribological Properties of Epoxy/Aramid Fabric Composites Reinforced by Boron nitride of Single Layer”, polymer-plastics Technology and Engineering, 53, 678-683.
Brostow W, Dutta M, Rusek P. (2010): “Modified epoxy coatings on mild steel: Tribology and surface energy”, European polymer Journal, 46(11), 2181-2189.
Chang L, Zhang Z, Breidt C, Friedrich K. (2005): “Tribological properties of epoxy nanocomposites: I. Enhancement of the wear resistance by nano-TiO2 particles”, Wear, 258(1-4),141-148.
Chang L, Zhang Z. (2006): “Tribological properties of epoxy nanocomposites: Part II. A combinative effect of short carbon fibre with nano-TiO2”, 260(7-8), 869-878.