Effect of Process Parameters on Tensile Behaviour of FSW AA 6061-AA 7075 Reinforced with TiO2 Particles Using Statistical Approach

Jump To References Section

Authors

  • K. C. Mahendra
     Department of Mechanical Engineering, UBDTCE, Davanagere, Karnataka ,IN
  • C. G. Sreenivasa
     Department of Mechanical Engineering, UBDTCE, Davanagere, Karnataka ,IN
  • H. M. Anil Kumar
     Department of Mechanical Engineering, BITM, Ballari, Karnataka ,IN
  • Veerabhadrappa Algur
     Department of Mechanical Engineering, RYMEC, Ballari, Karnataka ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32014

Keywords:

ANOVA, Friction Stir Welding, Larger is Better, Orthogonal Array, Taguchi Technique.

Abstract

Joining of dissimilar materials especially aluminium alloys through friction stir welding approach has been effectively carried out in different experimentations resulting in enhanced mechanical properties and meeting various application sectors. Process parameter plays an exceptional influence on the joint properties and determines the mechanical characterization. Here the objective is to investigate the AA6061 and AA 7075 reinforced with titanium dioxide (TiO2) nanoparticles using Taguchi and ANOVA methods considering pin profile, welding speed, tool rotational speed, and tilt angle utilizing this process. TiO2 powder was added at the weld juncture. All the specimens were welded subjected to various levels of operating conditions of the process parameters and further processed for tensile evaluation. Result shows that the most significant parameters are the tilt angle and pin profile for ultimate tensile strength.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-12-08

How to Cite

Mahendra, K. C., Sreenivasa, C. G., Anil Kumar, H. M., & Algur, V. (2022). Effect of Process Parameters on Tensile Behaviour of FSW AA 6061-AA 7075 Reinforced with TiO<sub>2</sub> Particles Using Statistical Approach. Journal of Mines, Metals and Fuels, 70(8A), 86–95. https://doi.org/10.18311/jmmf/2022/32014

Issue

Volume 70, Issue 8A, August 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Cole, Fehrenbache ,Duffie , Zinn , Pfefferkorn , Ferrier 2013 Int J Adv Manuf Techno Dec 2013 “Weld temperature effects during friction stir welding of dissimilar aluminium alloys 6061-T6 and 7075-T6” DOI 10.1007/s00170-013-5485-9: DOI: https://doi.org/10.1007/s00170-013-5485-9

Guo, Chen, Sun, G. Bi, Z. Sun, J. Wei 2013 Materials and Design 56 2013 Elsevier Publications “Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters” doi.org/10.1016/j.matdes.2013.10.082 DOI: https://doi.org/10.1016/j.matdes.2013.10.082

Bahrami, BesharatiGivi, Dhegihan, Nader 2014 “The role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique” http://dx.doi.org/10.1016/j.matdes. 2013.07.049 Elsevier Publications pp 519-527. DOI: https://doi.org/10.1016/j.matdes.2013.07.049

Singh, Khan, Siddiquee 2015 “Study on the effect of FSW process parameters on Joint quality of dissimilar materials” International Journal of Research in Engineering & Advanced Technology (May 2015) ISSN: 2320 – 8791 volume 3, Issue 2.

Pasha, Reddy, Laxminarayana, Khan 2016 “Aluminium oxide particulate reinforced friction stir welded joint of Aluminium Alloy 6061” International journal of engineering science and computing (May 2016) ISSN 2321 3361.DOI: 10.4010/2016.1417.

Patel, Patel, Vadher 2016 “effect of process parameters on AL6061 t 6 using friction stir welding by RSM method” International Journal of Mechanical and Production Engineering (July 2016) ijmpe-iraj-doionline-504 ,ISSN: 2320-2092 Volume- 4, Issue-7.

Farahm, Nikoo, Azizi, Parvin, Naghibi 2016 “ The influence of heat treatment on microstructure and wear properties of friction stir welded aa6061-t6/Al2O3 nano composite joint at four different traveling speed” Journal of Manufacturing Processes (March 2016) http://dx.doi.org/10.1016/j.jmapro.2016.01.003. DOI: https://doi.org/10.1016/j.jmapro.2016.01.003

Shanavas and Raja dhas 2016 “Parametric optimization of friction stir welding parameters of marine grade aluminium alloy using response surface methodology”, Transactions. Nonferrous Metals Society (Dec 2016) DOI: 10.1016/S1003-6326(17)60259-0. DOI: https://doi.org/10.1016/S1003-6326(17)60259-0

Kumar and Ramana 2017 “Effect of Tool Pin Profile on dissimilar friction stir welding of Aluminium Alloy Aa 7075 T6 51 And Aa 6061 T6" International Journal of Latest Trends in Engineering and Technology (Dec 2017)vol. (8) DOI: http://dx.doi.org/10.21172/1.83.015 ISSN:2278-621X. DOI: https://doi.org/10.21172/1.83.015

Melwin, Sridhar, Adhichelvan 2017 “Influence of friction stir welding parameters on microstructural and mechanical properties of dissimilar AA6061 and AA7075 Alloy Joints “International Journal of Science Technology & Engineering (Nov 2017) Volume 4 Issue 5. DOI: https://doi.org/10.1007/s13632-016-0315-8

Rao and Rao 2017 “Impact of mechanical properties & microstructures on aluminium alloys (AA6061-AA7075) by using friction stir welding process” (March 2017) volume 5 issue 3, pp 362-365. DOI: https://doi.org/10.22214/ijraset.2017.3065

Ugrasen,Kumar, Sagar, Shivu, Keshavamurthy 2018 “optimization of process parameters for Al6061-Al7075 alloys in friction stir welding using Taguchi’s technique” materials today: proceedings 5 Elsevier Publications ,pp 3027-3035. DOI: https://doi.org/10.1016/j.matpr.2018.01.103

Reddy, Sandeep, Kishore 2019 “experimental studies of friction stir welding on dissimilar aluminium alloys” International journal of research (June 2019) ISSN NO: 2236-6124volume 8, issue 6, pp 55-65.

Singh, Tiwari, Shukla 2019 “Friction-stir welding of AA6061-T6: the effects of Al2O3 nano-particles addition” Elsevier Publications, Results in Materials https://doi.org/10.1016/j.rinma.2019.100005. DOI: https://doi.org/10.1016/j.rinma.2019.100005

Senthil, Dinesh, Gokul, Diwakar Raju, Rakesh 2019 “Friction stir welding of dissimilar aluminium alloys 7075 and 6061” Journal of applied science and computations (May 2019) ISSN NO: 1076-5131 volume 6, issue 5.

Babu and Anbumalar 2019 “An experimental analysis and process parameter optimization on AA7075 T6-AA6061 T6 alloy using friction stir welding” Journal of advanced mechanical design, systems, and manufacturing (April 2019) DOI: 10.1299/jamdsm.2019 jamdsm. 0027 vol.13, no.2. DOI: https://doi.org/10.1299/jamdsm.2019jamdsm0027

Veerabhadrappa Algur, V R Kabadi, Ganechari S M, Vithal Rao Chavan 2017. Effect of Mn content on tribological wear behaviour of ZA-27 alloy, Materials today: Proceedings 4, (2017).: 10927-10934. DOI: https://doi.org/10.1016/j.matpr.2017.08.048

Patel, Krishna 2016 “Experimental Investigation of Friction Stir Welding of Aluminium Alloys Using Response Surface Methodology” Scholars Journal of Engineering and Technology (SJET) (Jul 2016) ISSN: 2320-2092,vol.4 Issue-7.

Veerabhadrappa Algur, Poornima Hulipalled, V Lokesha, Madeva Nagaral, V Auradi 2022 Machine Learning Algorithms to Predict Wear Behaviour of Modified ZA-27 Alloy Under Varying Operating Parameters, Journal of Bio-and Tribo-Corrosion, (2022). Vol. 8(1): 1-10 DOI: https://doi.org/10.1007/s40735-021-00610-8

Vithal rao chavan, K.R. Dinesh, K.Veeresh, Veerabhadrappa Algur 2017, Manjunath Shettar, Taguchi’s orthogonal array approach to evaluate drilling of GFRP particulate composites, Materials today: Proceedings, 4: 10927- 10934, (2017). DOI: https://doi.org/10.1016/j.matpr.2017.09.046

Jafari, Mansouri, Honarpisheh 2019 “Investigation of residual stress distribution of dissimilar Al-7075-T6 and Al- 6061-T6 in the friction stir welding process strengthened with SiO2 nanoparticles” Journal of Manufacturing Processes (May 2019) DOI: https://doi.org/10.1016/j.jmapro.2019.05.023

Vithal Rao Chauhan, Dr. K R Dinesh, Pavan Hiremath, Manjunath Shettar, Dr. K Veeresh, Veerabhadrappa Algur, (2015), “ Fabrication and Experimental Study on Optimization of Process Parameters for Drilling of GFRP with Iron Ore as Filler Material using Taguchi And ANOVA”, International Journal of Applied Engineering Research, 10(22)

Poornima Hulipalled, Veerabhadrappa Algur, V. Lokesha, (2022), “An Approach of Data Science for the Prediction of Wear Behaviour of Hypereutectoid Steel “, Journal of Bio- and Tribo-Corrosion, 8(69) DOI: https://doi.org/10.1007/s40735-022-00668-y

Reynolds 2008 “Flow visualization and simulation in FSW” Scripta Materialia 58 doi:10.1016/j.scriptamat.2007.10.048. DOI: https://doi.org/10.1016/S1359-6462(08)00171-1

Malik, Kailas 2020 “Understanding the effect of tool geometrical aspects on intensity of mixing and void formation in friction stir process” Journal of Mechanical Engineering Science, sage publications, (June 2020) DOI: 10.1177/0954406220938410 DOI: https://doi.org/10.1177/0954406220938410