Study on Influence of Process Parameters and Insert Nose Radius on Surface Roughness in Turning Operation

Jump To References Section

Authors

  • Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore 560054 ,IN
  • Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore 560054 ,IN
  • Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore 560054 ,IN
  • Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore 560054 ,IN
  • Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore 560054 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32023

Keywords:

Surface roughness, Taguchi, ANOVA, process parameters, insert nose radius

Abstract

In engineering manufacturing, contribution of machine tools is a vital deciding factor in fulfilling the dynamic requirements of an industry. In this context, an effort has been made to determine the most significant factor on surface roughness on mild steel material in plane turning operation. In the current study, an experimental work is carried out to determine the effect on surface roughness while machining under various machining factors, cutting tool insert nose radius and process parameters. The experimental trials were designed with Taguchi L9 orthogonal array and carried out for each insert nose radius with different levels of process parameters, spindle speed, depth of cut and feed rate. The surface roughness of the machined part was measured for each trial. The effect and significance of process parameters and insert tool nose radius on surface roughness was analysed using Analysis of variance (ANOVA). The investigation reveals that the spindle speed is the most significant factor on surface finish during plane turning operation.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-12-08

How to Cite

N, H., K, L., M R, B., Nagaraj, P. B., & ., S. (2022). Study on Influence of Process Parameters and Insert Nose Radius on Surface Roughness in Turning Operation. Journal of Mines, Metals and Fuels, 70(8A), 450–454. https://doi.org/10.18311/jmmf/2022/32023

Issue

Section

Articles

 

References

Ajithkumar and Xavior, 2019

Chandra et al ..., 2018

D’Addona and Raykar, 2016

Debnath et al. .., 2015

Dutta and Narala, 2021

Hessainia et al. .., 2013

Liu et al. .., 2021

Parida and Maity, 2019

Patel and Gandhi, 2019

Qehaja et al. .., 2015

Ramana et al. .., 2020

Sarnobat and Raval, 2019

Shankar et al. .., 2020

Suresh and Basavarajappa, 2014

Zurita et al. .., 2018