Free Vibration Characteristics of Carbon and Glass Fiber Hybrid Polymer Composite with Titanium Di-Oxide (TiO2) Powder as Filler
Authors
-
The National Institute of Engineering, Mysuru 570008, Karnataka ,IN
Suchitra D. -
The National Institute of Engineering, Mysuru 570008, Karnataka ,INVaibhav S. Deshpande
DOI:
https://doi.org/10.18311/jmmf/2023/33380Keywords:
Hybrid Composite, Titanium Di-Oxide (TiO2), Tensile, Flexural, FFTAbstract
Composites play a significant role in the modern designing materials due to their few kind properties like formability, temperature process, and cost-effective nature. Composite materials are generally used in different areas such as automotive and aircraft industry, space vehicles, and machine elements due to its high strength to weight ratio, high resistance to failure in dynamic conditions. This paper deals with the fabrication of carbon, glass-epoxy hybrid composites having a composition of 60-40% with Titanium Di-Oxide (TiO2) nano-powder as a filler material, varying with the percentage of 0.5%, 1%, 2% by weight. The fabrication of the hybrid composite plates according with the ASTM standards. Tensile test and flexural tests are performed to determine the mechanical properties of the composites having various percentage fillers. Modal analysis for vibration analysis using Fast Fourier Transform (FFT) is done and compared to the numerical results, which is obtained from Ansys software.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Ramakrishna, C.S., et al., (2021): Vibration behaviour of graphite powder in carbon/basalt reinforced epoxy composites. Materials Today: Proceedings.
Rout, G., et al., (2019): Experimental and Numerical Analysis of Hybrid Laminated Composite Beam. International Journal of Applied Engineering Research, 14(13), 93-99.
Rajeshkumar, G., and Hariharan, V. (2012, March): Free vibration analysis of hybrid-composite beams. In IEEE-International conference on advances in engineering, science and management (ICAESM- 2012) (pp.165-170). IEEE.
Ooha, B., et al., (2019): Experimental Investigation and Vibrational Behaviour of Laminated Hybrid Composites.
Madhu, S., and Swamy, M. K. (2017): Free Vibration Characteristics of Natural Fiber Reinforced HybridPolymer Composite Beam. International Journal of Scientific Engineering and Research, 5 (10), 81-87.
Kumar, M. D., et al., (2021): Study on static and dynamic behaviour of jute/sisal fiber reinforced epoxy composites. Materials Today: Proceedings, 46, 9425- 9428.
Surana, I., et al., (2019): Influence of filler material on mechanical and vibration properties of basalt/epoxy composites. Materials Research Express, 6(8), 085342.
Sumesh, K. R., and Kanthavel, K. (2020): Effect of TiO2 nano-filler in mechanical and free vibration damping behaviour of hybrid natural fiber composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(4), 1-12. https://doi.org/10.1007/ s40430-020-02308-3
Rachchh, N. V., and Trivedi, D. N. (2018): Mechanical characterization and vibration analysis of hybrid Eglass/ bagasse fiber polyester composites. Materials Today: Proceedings, 5(2), 7692-7700.
Yellamelli Vikas et al., (2017): Analysis of Free VibrationCharacteristic of Hybrid Polymer Composite Material, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181.
Prashanth, M. D., and Basava, T. (2018, June): Vibration analysis of natural hybrid composites by experimental approach. In IOP Conference Series: Materials Science and Engineering (Vol.376, No.1, p.012050). IOP Publishing.
Bezy N. A and Fathima, A. L. (2015): Effect of TiO2 nanoparticles on mechanical properties of epoxy-resin system. International Journal of Engineering Research and General Science, 3(5), 143-151.
Mishra, R, (2012): Effect of TiO2 nanoparticles on basalt/polysiloxane composites: mechanical and thermal characterization. Journal of the Textile Institute, 103(12), 1361-1368.
Ozsoy, I., et al., (2015), The influence of micro and nano-filler content on the mechanical properties of epoxy composites, Journal of mechanical engineering, 61(10), 601-609.
