Performance Evaluation of TiAlN Coated Tungesten Carbide and CBN Tool During Hot Machining of OHNS Round Bar

Jump To References Section

Authors

  • Utkarshkumar A. Patel
     Department of Mechanical Engineering, L.D. College of Engineering, Gujarat ,IN
  • Pankaj Rathod
     Department of Mechanical Engineering, Government Engineering College - Bhavnagar, Gujarat ,IN
  • Amitkumar B. Solanki
     ,IN
  • N. H. Pancholi
     Department of Mechanical Engineering, L.D. College of Engineering, Gujarat ,IN
  • Jayesh Parmar
     Department of Mechanical Engineering, L.D. College of Engineering, Gujarat ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/34499

Keywords:

Hot turning, Optimization, OHNS, CBN, TiAlN

Abstract

Hot machining is one method of machining easily hard materials. Heat is added to the cutting tool, resulting in a reduction in hardness and improved machining capabilities. During the hot turning process, the surface quality of the machined component improves. Cutting speeds, feed rates, and depth of cut for both CBN and TiAlN-coated tungesten carbide insert are optimised by trial and error. The effects of CBN and TiAlN inserts on hot turning and cold turning with minimal fluid application have been analysed in terms of power consumption, surface roughness, cutting force.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-07-26

How to Cite

Patel, U. A., Rathod, P., Solanki, A. B. ., Pancholi, N. H., & Parmar, J. (2023). Performance Evaluation of TiAlN Coated Tungesten Carbide and CBN Tool During Hot Machining of OHNS Round Bar. Journal of Mines, Metals and Fuels, 71(6), 829–838. https://doi.org/10.18311/jmmf/2023/34499

Issue

Volume 71, Issue 6, June 2023

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Gökkaya, H., and Nalbant, M., (2005): “The effects of cutting tool geometry and processing parameters on the surface roughness of AISI 1030 steel,” Materials and Design, vol. 28, pp 717-721.

Isik, Y., (2007): “Investigating the machinibility of tool steels in turning operations” Materials & design, vol.28, pp 1417-1424,

Vikramkumar, R. and Ramamoorthy, B., (2007): “Performance of coated tools during hard turning under minimum fluid application,” Journals of Materils Processing Technology, vol.185, pp 210-216.

Ranganathan, S., Senthivelan, T. and Sriram G., (2010): “Evalution of machining parameters of hot turning and stainless steel (type 316) by applying ANN and RSM,” Materils and Manufacturing processes, vol.25(10) pp 1131-1141.

Bensouilah, P., Aouici, H., Meddour, I., and Yallese, M., (2016): “Performance of coated and uncoated mixed ceramic tools in hard turning process” Measurement, vol.82, pp 1-18.

Zahia, H., Athmane, Y., and Lakhdar B., (2015): “Application of response surface methodology for predicting and optimizing surface roughness and cutting forces in hard turning by PVD coated insert” Int Journal Industrial Engineering Computation, vol. 6, pp 267-284.

Parida, A. and Ghadei, S., (2020): “Optimization of hot turning parameters using principal component analysis method” Materials Today: Proceeding, vol. 22, pp.2081-2087.

Chabbi, A., Yallese, M. and Girardian, F. (2017): “Modelling and Optimization of turning process parameters during the cutting of polymer (POM –C) based on RSM, ANN and DF methods” The International Journal of Advanced Manufacturing Technology, vol. 91, pp 2267-2290.