Bending, Tensile and Water Absoption Test of Corn Husk and Glass Fibre Reinforced Composite For Different Composition
DOI:
https://doi.org/10.18311/jmmf/2023/36100Keywords:
Bending Test, Corn Husk, Glass Fibre, Hand Lay-Up, Natural Composites, Tensile Test, Water Absorption TestAbstract
Now a day, there is a huge trend in research and development of bio-based products which have a wide variety of replacement for naturally existing materials. The current research intends to determine the qualities of a composite laminate material consisting of maize husk and glass fibre. The composite is created by alternately overlaying glass fibre cloths on corn husk fibre layers. The required composition and thickness are achieved by calculation of number of the layer of each fibres. The epoxy resin and hardener by weight is mixed in the ratio 10:1 respectively. It is poured between the layers of the composite to generate adhesion. Hand lay-up technique is adopted in manufacturing of the material and the material is pressed for certain duration using nut and bolt template assembly allowing it for natural curing. The composite is been tested for bending, tensile and water absorption tests according to standards.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Sampath P, Shankar AT, Umesha HB, Raju K, Chikkanna M. Comparative study of properties of corn husk and glass fibre reinforced composite. AIP Conference Proceedings; 2020. https://doi.org/10.1063/5.0007568 DOI: https://doi.org/10.1063/5.0007568
Prakrathi S, Arun TS, Harshith BU, Karthik R, Madhusudan C. A study on evaluation of mechanical properties of reinforced composite developed using corn husk and glass fibre. International Journal of Manufacturing and Materials Processing. 2019; 5(1):32-36. https://doi. org/10.37628/ijmmp.v5i1.821 DOI: https://doi.org/10.37628/ijmmp.v5i1.821
Vaisanen T, Haapala A, Lappalainen R, Tomppo L. Utilization of agricultural and forest industry waste and residues in natural fibre-polymer composites. Waste Management. 2016; 54:62-73 DOI: https://doi.org/10.1016/j.wasman.2016.04.037
Abba HA, Nur IZ, Salit SM. Review of agro waste plastic composites production. Minerals and Materials Characterization and Engineering. 2013; 1:271-9. https://doi.org/10.4236/jmmce.2013.15041 DOI: https://doi.org/10.4236/jmmce.2013.15041
Rabemanolontsoa H, Saka S. Comparative study on chemical composition of various biomass species. Japan: Kyoto University; 2013. https://doi.org/10.1039/c3ra22958k DOI: https://doi.org/10.1039/c3ra22958k
Youssef AM, El-Gendy A, Kamel S. Evaluation of corn husk fibres reinforced recycled LDPE composites. Materials Chemistry and Physics. 2015; 152: 26-33 https://doi. org/10.1016/j.matchemphys.2014.12.004 DOI: https://doi.org/10.1016/j.matchemphys.2014.12.004
Reddy N, Yang Y. Bio fibers from agricultural by-products for industrial applications. Trends in Biotechnology. 2005; 23(1):22-7. https://doi.org/10.1016/j.tibtech.2004.11.002 DOI: https://doi.org/10.1016/j.tibtech.2004.11.002
Available from: https://en.wikipedia.org/wiki/Fiberglass
Nourbakhsh A, Ashori A. Wood plastic composites using agro-wastes: Analysis of mechanical properties. Bioresource Technology. 2010; 101(7):2525-8. https://doi.org/10.1016/j.biortech.2009.11.040 DOI: https://doi.org/10.1016/j.biortech.2009.11.040
Serrano DP, Aguado J, Escola JM, Garagorri E, Rodr’ıguez JM, Morselli L, Palazzi G, Orsi R. Feedstock recycling of agriculture plastic film wastes by catalytic cracking. Applied Catalysis B: Environmental. 2004; 49:257-65. https://doi.org/10.1016/j.apcatb.2003.12.014 DOI: https://doi.org/10.1016/j.apcatb.2003.12.014
Mugnozza GS, Schettini E, Vox G, Malinconico M, Immirzi B, Pagliara S. Mechanical properties decay and morphological behavior of biodegradable films for agricultural mulching in real scale experiment. Polymer Degradation and Stability. 2006; 91(11):2801-8. https:// doi.org/10.1016/j.polymdegradstab.2006.02.017 DOI: https://doi.org/10.1016/j.polymdegradstab.2006.02.017
Meinathan S, Unni DK, Musthafa MKNMN, Asker KM. Fabrication and Testing of Reinforced Natural Fiber Composite. International Journal of Engineering Research and Technology (IJERT) ETDM. 2017; 5(07).
Munoz E, García-Manrique JA. Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. International Journal of Polymer Science. 2015. https://doi. org/10.1155/2015/390275 DOI: https://doi.org/10.1155/2015/390275