Volume 72, Issue 2, February 2024

Articles

• Selective Laser Melting of AlSi10Mg: Corrosion Behavior

  Prabhukumar Sellamuthu, Katakam Sivaprasad, Konda Gokuldoss Prashanth (Author)

  93-102

  Keywords:

  Additive Manufacturing, AlSi10Mg Alloy, Corrosion, Selective Laser Melting

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/36429

• Fabrication and Mechanical Testing of Glass Fiber Reinforced Epoxy Matrix Composites Modified with Powdered Metallic Fillers

  B. Ravikiran Kamath, M. Sudheer, Vidyasagar Shetty, Deepak Kothari, Thrivikram Prabhu (Author)

  103-109

  Keywords:

  Glass Fiber, Hand Lay Up, Mechanical Testing, Metallic Filler, Polymer Composite

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/42139

• Reuse of Brick Waste in the Construction Industry

  Saikat Deb, Mriganka Mazumdar, Rakesh A. Afre (Author)

  111-117

  Keywords:

  Brick Aggregate Reuse, Demolition Waste Management, Sustainable Construction

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/35536

• Optimization of Process Parameters of Wire Electric Discharge Machining Process for Machining AISI A2 Tool Steel

  V. R. Srinivasan, G. S. Girishkumar, M. R. Kamesh, Vikram Kedambadi Vasu, P. Raja, T. M. Sagar, P. Prathap, S. Pavan, H. Manjunath, D. Ruvel, Manjunath Hugar, H. Mounesh, M. Surya (Author)

  119-126

  Keywords:

  AISI A2 Tool Steel, Design of Experiments, Material Removal Rate, Surface Roughness, Wire Electric Discharge Machining

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/38682

• Analysing Slope Stability in Response to Blast-Induced Dynamic Loading by Pseudo-Static Approach

  Ch. Venkat Ramana, N. R. Thote, Arun Kumar Singh (Author)

  127-145

  Keywords:

  Blasting, Critical Slip Surface, Near Field Monitoring, Pseudo-Static Approach, Seismic Coefficient, Seismic Coefficient Ratio, Slope Stability

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/36463

• Prediction of Rockfall from Highwall Slope in an Open Cast Mine

  S. Raja, M. Abhishek, Naveen B. Balegar, L. Kristharaj, Sudarshan G. Yeligar (Author)

  147-163

  Keywords:

  Highwall, Kinetic Energy of Rock Fall, Opencast Mine, Rockfall

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/42096

• Mine Active Internal Dump Susceptible Zone Identification using MMO Technique

  Kapoor Chand, Radhakanta Koner (Author)

  165-177

  Keywords:

  Dump Stability Analysis, 3D Modelling, Susceptible Zone Identification, UAV Photogrammetry

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/35719

• Effect of Reinforcement on Micro Structural and Compressive Deformation Behavior on Closed Cell AA7075 Aluminium Foam

  Nitish Kumar Singh, S. Balaguru, Pavan Mehta, Amit Kaimkuriya, Avinash Kumar Namdeo, Rupak Kumar Deb (Author)

  179-187

  Keywords:

  AA7075, Cell Wall, Energy Absorption, Plateau Stress, Silicon Carbide

  • PDF ⁰

  Abstract views: 0 times| Download: 0 times| https://doi.org/10.18311/jmmf/2024/35988