Experimental Study of Electrochemical Etch-Stop Technique (ECE) for Achieving Better Uniformity and Precise Diaphragm Thickness
In this article Electrochemical Etch Stop (ECE) technique is employed in comparison with the standard timed etch technique to etch the silicon wafer. The experiment is conducted using 6” double sided polished silicon wafer and standard CMOS steps are ollowed for the fabrication. Instead of using implantation process for electrical contacts which induces defects and stresses, etching and metal patterning is carried out to get the desired contacts. Experimental results for diaphragm thickness of 10¼m achieved by both techniques are studied. Compared to timed etch, tolerances achieved in ECE technique is better than 3¼m with good uniformity and yield. Further simulation study using T-CAD (Technology-CAD) tools is also presented in this article for optimum dose selection in creating ohmic contact for ECE technique.