Preparation and characterization of spray deposited CdTe thin films towards fabrication of low cost heterojunction solar cells

Cadmium telluride (CdTe) thin films of various thicknesses (55–95 nm) were deposited through multi cycle mode on Si (100) substrates at a temperature of 350ºC by spray pyrolysis technique under optimum conditions, for application as an absorber layer for hetero-junction solar cells. The structural, morphological and compositional studies of films were made through XRD, SEM and EDAX. By performing isochronal and isothermal annealing studies, resistivities of films were optimized. The estimated values of barrier height, ideality factor and reverse saturation current from M-S-M studies were found to be in the range of 0.645–0.844 eV, 0.648–10.82 and 1.309x10-8–2.751x10-5A, respectively. The influence of CdTe film thickness on Au/CdTe/nSi/Al hetero-junction solar cell characteristics were made and the estimated cell parameters such as series resistance, shunt resistance, fill factor and efficiency were found to be in the range of 110k&!–2.66M&!, 9.3k&!–133 M&!, 25.01– 26.03% and 0.00060 – 0.00020%, respectively.

View article page

Download PDF