Volume 50, Issue 4, October 2017

Published: 2017-12-11

Articles

Microstructural Characteristics and Mechanical Properties of Dissimilar Joints of Aisi 316LN Austenitic Stainless Steel and Modified 9Cr-1Mo Steel

K. Karthick, S. Malarvizhi, V. Balasubramanian, S. A. Krishnan, G. Sasikala, Shaju K. Albert

36-49

Keywords:
Welding, Dissimilar Joint, Mechanical Properties, Microstructure, Microhardness.
- PDF ⁰
Abstract views: 0 times| Download: 0 times| https://doi.org/10.22486/iwj/2017/v50/i4/162273
Vacuum Brazing of Inconel 718 to Ti-6Al-4V

Sree Vardhan Lalam

47-55

Keywords:
Ti-6al-4v, Inconel 718, Vacuum Brazing, TiCuNi, Dissimilar Joint.
- PDF ⁰
Abstract views: 0 times| Download: 0 times| https://doi.org/10.22486/iwj/2017/v50/i4/162274
Interpulse Tig Welding of Titanium Alloy (TI-6Al-4V)

Debashis Mishra, A. Manjunath, K. Parthiban

56-71

Keywords:
Interpulse TIG Welding, Titanium Alloy, Ti-6Al-4V, Weld Bead Width.
- PDF ⁰
Abstract views: 0 times| Download: 0 times| https://doi.org/10.22486/iwj/2017/v50/i4/162271
Effect of Activating Flux on Penetration in ATIG Welding of 316 Stainless Steel

Sagar Roy, Siladitya Samaddar, Md. Nasim Uddin, Aktarul Hoque, Sagnik Mishra, Santanu Das

72-80

Keywords:
Welding, GTAW, ATIG Welding, Activating Flux, Bead-on-Plate Welding, Bead Geometry, Penetration.
- PDF ⁰
Abstract views: 0 times| Download: 0 times| https://doi.org/10.22486/iwj/2017/v50/i4/162275

Editorial

Editorial

Santanu Das

13-13
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

Secretary's Report

From the Desk of the Honorary Secretary General

Parimal Biswas

14-14
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

TIT Bit in Welding

An Approach to Best Welding Practice:Partâ€“VIII

S. K. Gupta

35-38
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

Reports

Report of the 51st Annual General Meeting of the Indian Institute of Welding

. .

15-17
- PDF ⁰
Abstract views: 0 times| Download: 0 times|