Dependency of blast-induced ground vibration on the concentration and distribution of explosive charge in surface blasting

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/29654

Keywords:

Blast-induced ground vibration, charge concentration, charge distribution, explosives, peak particle velocity

Abstract

Blast-induced ground vibration has always been a subject of concern for blasting engineers. Since many decades, a lot of research work has been carried out to identify the factors resulting in higher ground vibrations and are also optimized to reduce the ground vibration due to blasting. Explosives are charged in holes which are drilled in a particular pattern for distribution of energy of explosives and delays are provided between charged holes to utilize the explosive energy in efficient way and get the desired results. The effect of charge concentration and distribution on blast induced ground vibration still require verification with proper experimentations on field. This paper deals in understanding the influence of maximum instantaneous charge on blastinduced ground vibration in surface blasting while varying the charge concentration and distribution. With field experimentations and investigations, it has been found that the blast-induced ground vibration results at same scaled distance in terms of PPV values were different with different charge distribution. On the basis of obtained results, a new empirical relation has been developed based on charge distribution for computation of effective explosive weight per delay for multi hole simultaneous firing. The developed relation has also been validated in a different geological condition in a separate mine.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-02-24

How to Cite

Garai, D., Agrawal, H., & Mishra, A. (2022). Dependency of blast-induced ground vibration on the concentration and distribution of explosive charge in surface blasting. Journal of Mines, Metals and Fuels, 70(1), 11–17. https://doi.org/10.18311/jmmf/2022/29654

Issue

Section

Articles
Received 2022-02-24
Accepted 2022-02-24
Published 2022-02-24

 

References

Dowding CH, Dowding CH. (1996): Construction vibrations. vol. 81. Prentice Hall Upper Saddle River, NJ.

Mohanty B, Yang R. (1997): Blasting Vibrations and Explosives Performance. Int. Soc. Explos. Eng., p. 15–26.

Mishra AK. (2013): Unlocking possibility of blasting near residential structure using electronic detonators. J Geol Soc India; 81:429–35. https://doi.org/10.1007/s12594-013-0054-2.

Kopp JW, Siskind DE. (1986): Effects of millisecond-delay intervals on vibration and airblast from surface-coal-mine blasting. Report of Investigations/1986. Bureau of Mines, Twin Cities, MN (USA). Twin Cities Research Center.

USBM, Siskind DE. (1980): Structure response and damage produced by ground vibration from surface mine blasting. US Department of the Interior, Bureau of Mines New York.

Agrawal H, Mishra AK. (2017): Evolution of digital detonators as an intelligent tool for control blasting in Indian mines. Ann. Chim. Des Mater., vol. 41, Lavoisier 14, Rue DE Provigny, 94236 Cachan, France, p. 157–71.

Yuvka S, Beyhan S, Uysal O. (2017): The effect of the number of holes on blast-induced ground vibrations. Environ Earth Sci; 76:621. https://doi.org/10.1007/s12665-017-6959-0.

Singh PK, Vogt W, Singh RB, Singh DP. (1996): Blasting side effects-Investigations in an opencast coal mine in India. Int J Surf Min Reclam;10:155–9.

Mishra AK, Nigam YK, Singh DR. (2017): Controlled blasting in a limestone mine using electronic detonators: A case study. J Geol Soc India; 89:87–90. https://doi.org/10.1007/s12594-017-0563-5.

Zhou J, Asteris PG, Armaghani DJ, Pham BT. (2020): Prediction of ground vibration induced by blasting operations through the use of the Bayesian Network and random forest models. Soil Dyn Earthq Eng; 139:106390.

Murmu S, Maheshwari P, Verma HK. (2018): Empirical and probabilistic analysis of blast-induced ground vibrations International Journal of Rock Mechanics and Mining Sciences Empirical and probabilistic analysis of blastinduced ground vibrations. Int J Rock Mech Min Sci; 103:267–74. https://doi.org/10.1016/j.ijrmms.2018.01.038.

Agrawal H, Mishra AK. (2019): An innovative technique of simplified signature hole analysis for prediction of blastinduced ground vibration of multi-hole/production blast: an empirical analysis. Nat Hazards 1–22. https://doi.org/10.1007/s11069-019-03801-2.

Singh CP, Agrawal H, Mishra AK, Singh PK. (2019): Reducing environmental hazards of blasting using electronic detonators in a large opencast coal project - a case study. J Mines, Met Fuels; 67:345–50.

Jimeno EL, Jimino CL, Carcedo A. (1995): Drilling and blasting of rocks. CRC Press.

Yilmaz O. (2016): The comparison of most widely used ground vibration predictor equations and suggestions for the new attenuation formulas. Environ Earth Sci; 75:269. https://doi.org/10.1007/s12665-015-5011-5.

Agrawal H, Mishra AK. (2018): Modified scaled distance regression analysis approach for prediction of blastinduced ground vibration in multi-hole blasting. J Rock Mech Geotech Eng.

Hustrulid W, Lu W. (2002): Some general design concepts regarding the control of blast-induced damage during rock slope excavation. Proc 7th Rock Fragm by Blasting, Beijing.

Grant JR, Spathis AT, Blair DP. (1987): An investigation of the influence of charge length upon blast vibrations. 6th ISRM Congr., International Society for Rock Mechanics.

Hudaverdi T, Akyildiz O. (2017): Investigation of the sitespecific character of blast vibration prediction. Environ Earth Sci; 76:138. https://doi.org/10.1007/s12665-017- 6456-5.

Agrawal H, Mishra AK. (2018): Probabilistic analysis on scattering effect of initiation systems and concept of modified charge per delay for prediction of blast induced ground vibrations. Measurement; 130:306–17.

Singh TN, Verma AK. (2010): Sensitivity of total charge and maximum charge per delay on ground vibration. Geomatics, Nat Hazards Risk; 1:259–72.

Shi XZ, Chen SR. (2011): Delay time optimization in blasting operations for mitigating the vibration-effects on final pit walls’ stability. Soil Dyn Earthq Eng; 31:1154–8. https://doi.org/10.1016/j.soildyn.2011.04.004.

Silva J, Li L, Gernand JM. (2017): Reliability analysis for mine blast performance based on delay type and firing time. Int J Min Sci Technol. https://doi.org/10.1016/j.ijmst.2017.07.004.

Agrawal H, Mishra AK. (2018): Evaluation of initiating system by measurement of seismic energy dissipation in surface blasting. Arab J Geosci; 11:345. https://doi.org/10.1007/s12517-018-3683-3.

Garai D, Agrawal H, Mishra AK, Kumar S. (2018): Influence of initiation system on blast-induced ground vibration using random forest algorithm, artificial neural network, and scaled distance analysis. Math Model Eng Probl. 5:418–26.

Mishra AK, Agrawal H, Raut M. Effect of aluminum content on detonation velocity and density of emulsion explosives. J Mol Model 2019;25:70–9.

Hosseini SA, Tavana A, Abdolahi SM, Darvishmaslak S. (2019): Prediction of blast induced ground vibrations in quarry sites: a comparison of GP, RSM and MARS. Soil Dyn Earthq Eng; 119:118–29.

Garai D, Mishra AK, Kumar S, Agrawal H. (2018): Development of a universal blast-induced ground vibration prediction model for Jharia coalfields. Model Meas Control C; 79:46–55.

Anderson DA. (2000): The 8 Millisecond “Criterion”: Have We Delayed Too Long in Questioning It/ ? Int. Soc. Explos. Eng., p.381–95.