A Performance Study on Heat Transfer Using Different Heat Sink by Experimentation and Optimization Method

Jump To References Section

Authors

  • S. Sushma
     Department of Mechanical Engineering, Channabasaveshwara Institute of Technology, Gubbi-572216 ,IN
  • T. K. Chandrashekar
     Department of Mechanical Engineering, RNS Institute of Technology, Bangalore-560098 ,IN
  • S. B. Nagesh
     Channabasaveshwara Institute of Technology Gubbi-572216 ,IN
  • H. Naresh
     Department of Mechanical Engineering, Siddaganga Institute of Technology Tumkur-572103 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32008

Keywords:

Forced Convection, Heat Sink, Heat Transfer, Optimization, Taguchi.

Abstract

With the advancement of new technologies, the reductions of size are more in recent electronic devices, which lead to an increase in heat dissipation. Thus, the problem of electronic cooling has become a critical issue in this area. This work is based on the experimental and optimization analysis. The results from the experimental analysis are compared for different shaped heat sinks like concave and congruent made up of copper and aluminium respectively. The experiment is conducted for different heat input and the performance of the heat sink is observed. Results shows that the heat transfer coefficient is more and thermal resistance is less with concave shaped heat sink and this study on experimental performance of different shaped heat sink manifests its application in electronic devices.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-12-08

How to Cite

Sushma, S., Chandrashekar, T. K., Nagesh, S. B., & Naresh, H. (2022). A Performance Study on Heat Transfer Using Different Heat Sink by Experimentation and Optimization Method. Journal of Mines, Metals and Fuels, 70(8A), 41–48. https://doi.org/10.18311/jmmf/2022/32008

Issue

Volume 70, Issue 8A, August 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Lee J. J et.al. (2019): Experimental Study on Forced Convection Heat transfer from Plate-Fin Heat Sinks with Partial Heating; Processes; 7, 772; doi:10.3390/pr7100772. DOI: https://doi.org/10.3390/pr7100772

Dixit.A and Patil A K. (2015): Heat Transfer Characteristics of Grooved Fin Under Forced Convection; Heat Transfer Engineering; 36:16, 1409-1416, DOI:10.1080/01457632.2015.1003726 DOI: https://doi.org/10.1080/01457632.2015.1003726

Tijaani A S and Jaffri N B. (2018): Thermal Analysis of perforated pin-fins heat sink under forced convection condition; 4th International conference on System Integrated Intelligence, Procedia Manufacturing 24 290–298 DOI: https://doi.org/10.1016/j.promfg.2018.06.025

Abou-Ziyan H.Z et.al., (2016): Enhancement of forced convection in wide cylindrical annular channel using rotating inner pipe with interrupted helical fins; International Journal of Heat and Mass Transfer 95 996–1007, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015. 12.066 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.066

Shen.B et.al., (2017): Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams; International Journal of Heat and Mass Transfer 113 1043–1053, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017. 06.004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.004

Yabo,W et.al., (2019): Effects of the location of the inlet and outlet on heat transfer performance in pin fin CPU heat sink; Applied Thermal Engineering 151 506–513, https://doi.org/10.1016/j.applthermaleng.2019.02.0 30 DOI: https://doi.org/10.1016/j.applthermaleng.2019.02.030

TawatSamana et.al., (2014): Enhancement of fin efficiency of a solid wire fin by oscillating heat pipe under forced convection; Case Studies in Thermal Engineering 2 36–41, http://dx.doi.org/10.1016/j.csite.2013.10.003 DOI: https://doi.org/10.1016/j.csite.2013.10.003

Yeom. T et.al., (2016): High-frequency translational agitation with micro pin-fin surfaces for enhancing heat transfer of forced convection; International Journal of Heat and Mass Transfer 94 354–365, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015. 11.054. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.054

Hashemian. M et.al., (2017): Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form; Applied Thermal Engineering 118 408–417, http://dx.doi.org/10.1016/j.applthermaleng.2017.02.095 DOI: https://doi.org/10.1016/j.applthermaleng.2017.02.095

Iqbal.Z et.al., (2013): Optimal fin shape in finned double pipe with fully developed laminar flow; Applied Thermal Engineering 51 1202e1223, http://dx.doi.org/10.1016/j.applthermaleng.2012.10.036. DOI: https://doi.org/10.1016/j.applthermaleng.2012.10.036

Silva M.J et.al., (2017): Forced convection on grey cast iron plate-fins: Prediction of the heat transfer coefficient; International Communications in Heat and Mass Transfer 81 1–7, http://dx.doi.org/10.1016/j.icheatmasstransfer.2016. 11.007. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2016.11.007

Diani.A et.al., (2013): An assessment on air forced convection on extended surfaces: Experimental results and numerical modelling, International Journal of Thermal Sciences 67 120e134, http://dx.doi.org/10.1016/j.ijthermalsci.2012.11.01 2. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.11.012

González A.M. et.al., (2019): A hybrid numerical-experimental analysis of heat transfer by forced convection in plate-finned heat exchangers; Applied Thermal Engineering 148 363–370, https://doi.org/10.1016/j.applthermaleng.2018.11.0 68 DOI: https://doi.org/10.1016/j.applthermaleng.2018.11.068

Deshmukh P.A. and Warkhedkar R.M., (2013): Thermal performance of elliptical pin fin heat sink under combined natural and forced convection; Experimental Thermal and Fluid Science 50 61–68, http://dx.doi.org/10.1016/j.expthermflusci.2013.05. 005 DOI: https://doi.org/10.1016/j.expthermflusci.2013.05.005

Sheikholeslami. M. et.al., (2016): Experimental study on turbulent flow and heat transfer in an air to water heat exchanger using perforated circular- ring; Experimental Thermal and Fluid Science 70 185–195, http://dx.doi.org/10.1016/j.expthermflusci.2015.09. 002. DOI: https://doi.org/10.1016/j.expthermflusci.2015.09.002

Al-Sarkhi. A and Abu-Nada. E, (2005): Characteristics of forced convection heat transfer in vertical internally finned tube; International Communications in Heat and Mass Transfer 32 557–564, doi:10.1016/j.icheatmasstransfer.2004.03.015. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2004.03.015

Ibrahim T K. et.al., (2018): Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer; International Journal of Heat and Mass Transfer 118 832–846, DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.047 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.047

Chang S.W. et.al., (2017): Heat transfer enhancement of vertical dimpled fin array in natural convection; International Journal of Heat and Mass Transfer 106 781–792, doi: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016. 09.094 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.094

Ayli.E.et.al., (2016): Experimental investigation and CFD analysis of rectangular profile FINS in a square channel for forced convection regimes; International Journal of Thermal Sciences 109 279e290, DOI: http://dx.doi.org/10.1016/j.ijthermalsci.2016.06.02 1. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.06.021

Maji..A.et.al, (2019): Thermal Analysis for Heat Transfer Enhancement in Perforated Pin Fins of Various Shapes with Staggered Arrays; Heat Transfer Engineering, 40:3-4, 295-319 DOI:10.1080/01457632.2018.1429047 DOI: https://doi.org/10.1080/01457632.2018.1429047

Buyruk..E and Karabulut. K, (2020): Research of Heat Transfer Augmentation in Plate Fin Heat Exchangers Having Different Fin Types; ISSN 1810-2328, Journal of Engineering Thermophysics, Vol. 29, No. 2, pp. 316–330.DOI: 10.1134/S1810232820020137 DOI: https://doi.org/10.1134/S1810232820020137

Yifan Li et.al, (2017): Effect of geometric configuration on the laminar flow and heat transfer in microchannel heat sinks with cavities and fins; Numerical Heat Transfer, Part A: Applications, 71:5, 528-546. DOI: 10.1080/10407782.2016.1277940. DOI: https://doi.org/10.1080/10407782.2016.1277940

Osama A. et.al., (2021): Heat Transfer Enhancement in a Double Pipe Heat Exchanger Using Different Fin Geometries in Turbulent Flow; Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 45:461– 471, 45:461–471, https://doi.org/10.1007/s40997-020-00377-2. DOI: https://doi.org/10.1007/s40997-020-00377-2

Shadlaghani .A, et.al, (2016): Optimization of triangular fins with/without longitudinal perforate for thermal performance enhancement, Journal of Mechanical Science and Technology 30 (4) 1903~1910, DOI 10.1007/s12206-016-0349-5.