Impact of Porosity on Underground Structure - A Review
DOI:
https://doi.org/10.18311/jmmf/2024/32402Keywords:
Confining Pressure, Hydraulic Conductivity, Sorting, Total PorosityAbstract
Porosity is an index property that is present in all solid materials. It is used to understand the flow channel inside a material, also the pore space and matrix. The porosity of rock and soil can be divided into two types, namely, total and effective porosity. Porosity is one of the important parameters for any underground structure and rockmass which can even result in its failure with time. The primary goal of this review is to comprehend how porosity affects subsurface structures and rock mass. Although the rock and soil both have porosity, the rockmass connected to subsurface structures is the primary subject of the paper. This paper focuses on how porosity is measured, what influences porosity, and how porosity relates to other geo-mechanical parameters, this paper also discussed about the impact of changing porosity on underground constructions including tunnels, mines, underground storage, and caverns.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Accepted 2024-07-18
Published 2024-08-19
References
Slideshare [Internet]. Porosity; 2021.
General Engineering and Science. In: Elsevier eBooks. 2016. p. 2–177. https://doi.org/10.1016/b978-0-12-383846-9.00002-3.
Likar J, Cadez J. Ventilation design of enclosed underground structures. Tunnelling and Underground Space Technology. 2000; 15(4):477–480. https://doi.org/10.1016/s0886-7798(01)00017-7
Liu J, Li D, Chen X, Wang S, Wang H, Xu Y. Overburden stress arch elevation effect induced by roof cutting and destress technique in coal mine longwall panel and its control mechanism to entry surrounding rock. Min Metall Explor. 2023; 40(4):1237–1252. https://doi.org/10.1007/s42461-023-00798-y
Peng R, Di B, Glover PWJ, Wei J, Lorinczi P, Ding P, et al. The effect of rock permeability and porosity on seismoelectric conversion: Experiment and analytical modelling. Geophys J Int. 2019; 219(1):328–45. https://doi.org/10.1093/gji/ggz249
Chimmani K V, Lokhande RD. Study the behaviour of underground oil cavern under static loading condition. Geotechnical and Geological Engineering. 2022; 40(2):995–1007. https://doi.org/10.1007/s10706-021-01939-0
Kobrynich J. Absolute and effective porosity of petroleum reservoirs: The barnes fluid saturation technique and helium porosimetry of sandstones. 2015; 1–4.
Shanmugam G. Types of porosity in sandstones and their significance in interpreting provenance. Provenance of Arenites. Dordrecht: Springer Netherlands; 1985; 148:115–37. https://doi.org/10.1007/978-94-017-2809-6_6
Van der Land C, Wood R, Wu K, van Dijke MIJ, Jiang Z, Corbett PWM, et al. Modelling the permeability evolution of carbonate rocks. Mar Pet Geol. 2013; 48:1–7. https://doi.org/10.1016/j.marpetgeo.2013.07.006
Atapour H, Mortazavi A. The effect of grain size and cement content on index properties of weakly solidified artificial sandstones. J Geophys Eng. 2018; 15(2):613–619. https://doi.org/10.1088/1742-2140/aaa14a
Anovitz LM, Cole DR. Characterization and analysis of porosity and pore structures. Rev Mineral Geochem. 2015; 80(1):161–164. https://doi.org/10.1515/9781501502071-004
Khan MI, Islam MR. Reservoir engineering and secondary recovery. The Petroleum Engineering Handbook: Sustainable Operations. Elsevier. 2007; 189–241. https://doi.org/10.1016/b978-1-933762-12-8.50013-1
Science Direct. Secondary porosity; 2021.
Kazatchenko E, Mousatov A. Primary and secondary porosity estimation of carbonate formations using total porosity and the formation factor. SPE. 2002. https://doi.org/10.2118/77787-MS
Javandel I. On the field determination of effective porosity. Proceedings of the Conference on New Field Techniques for Quantifying the Physical and Chemical Properties of Heterogeneous Aquifers; 1989. p. 155–172.
Hook JR. An introduction to porosity. Petrophyscs. 2003; 44(3).
Peter MC. DGK. Methods in exploration, laboratory methods in development geology reference manual.
Webb PA. Volume and density determinations for particle technologists. Micromeritics Instrument Corp. 2001; 2(16).
Gooch JW. Boyle’s law. Encyclopedic Dictionary of Polymers. Springer; 2011. p. 92. https://doi.org/10.1007/978-1-4419-6247-8_1540
Boyle’s law. Wikipedia; 2021.
Nolte S, Fink R, Krooss BM, Amann-Hildenbrand A, Wang Y, Wang M, et al. Experimental investigation of gas dynamic effects using nanoporous synthetic materials as tight rock analogues. Transp Porous Media. 2021; 137(3):519–53. https://doi.org/10.1007/s11242-021-01572-8
Sitaresmi R, Wijanarko GH, Wijayanti P, Kusumawardhani D. Determining of formation water saturation to estimate remining hydrocarbon saturation in the X layer Y field. Jurnal Ilmiah Teknik Perminyakan. 2019; 3. https://doi.org/10.25105/petro.v8i3.5514
Andreola F, Leonelli C, Romagnoli M, Miselli P. Techniques used to determine porosity. 2000; 79(7):49-52. https://www.researchgate.net/publication/279548122
Miletic M, Kucukuysal C, Gulcan M, Garcia R. Imaging porosity evolution of tight sandstone during spontaneous water imbibition by X-ray micro-CT. Heliyon. 2024; 10(11):e31844. https://doi.org/10.1016/j.heliyon.2024.e31844
Porosity evaluation. Petro Wiki; 2015.
Baker RO, Yarranton HW, Jensen JL. Conventional core analysis–rock properties. Practical Reservoir Engineering and Characterization. 2015; 197–237. https://doi.org/10.1016/b978-0-12-801811-8.00007-9
Porositas P, Untuk K, Kualitas P, Pada B, Batupasir F, Rahmawan S, et al. The use of critical porosity on grouping of rocks quality of sandstone formations. Journal of Earth Energy Science, Engineering, and Technology. 2018; 2(1). https://doi.org/10.25105/jeeset.v2i1.4646
El Sharawy MS, Nabawy BS. Determining the porosity exponent m and lithology factor a for sandstones and their control by overburden pressure: A case study from the Gulf of Suez, Egypt. Am Assoc Pet Geol Bull. 2018; 102(09):1893–910. https://doi.org/10.1306/03141817262
Bowman TD. Direct method for determining organic shale potential from porosity and resistivity logs to identify possible resource plays. Search and Discovery. 2010; 110128:34pp.
Wyllie MRJ, Gregory AR, Gardner LW. Elastic wave velocities in heterogeneous and porous media. Geophysics. 1956; 21(1):41–70. https://doi.org/10.1190/1.1438217
Wyllie MRJ, Gregory AR, Gardner GHF. An experimental investigation of factors affecting elastic wave velocities in porous media. Geophysics. 1958; 23(3):459–93. https://doi.org/10.1190/1.1438493
Density logging. Wikipedia contributor. Wikipedia. 2022.
Formation evaluation neutron porosity. Wikipedia contributor. Wikipedia. 2022.
Alam MA, Chaudhry A. Effect of angularity on hydraulic conductivity of porous media. International Journal of Scientific Engineering and Research (IJSER). 2015
Yu C, Ji S, Li Q. Effects of porosity on seismic velocities, elastic moduli and Poisson’s ratios of solid materials and rocks. Journal of Rock Mechanics and Geotechnical Engineering. 2016; 8(1):35–49. https://doi.org/10.1016/j.jrmge.2015.07.004
Nicksiar M, Martin CD. Factors affecting crack initiation in low porosity crystalline rocks. Rock Mech Rock Eng. 2014; 47(4):1165–1181. https://doi.org/10.1007/s00603-013-0451-2
Sperl J, Trckova J. Permeability and porosity of rocks and their relationship based on laboratory testing. Acta Geodyn Geomater. 2008; 5(1)41-47.
Hassanzadegan A, Blocher G, Milsch H, Urpi L, Zimmermann G. The effects of temperature and pressure on the porosity evolution of flechtinger sandstone. Rock Mech Rock Eng. 2014; 47(2):421–434. https://doi.org/10.1007/s00603-013-0401-z
Ozguven A, Ozcelik Y. Effects of high temperature on physico-mechanical properties of Turkish natural building stones. Eng Geol. 2014; 183:127–136. https://doi.org/10.1016/j.enggeo.2014.10.006
Luc Leroy MN, Marius FW, Francois N. Experimental and theoretical investigations of hard rocks at high temperature: Applications in civil engineering. Advances in Civil Engineering. 2021; 1–21. https://doi.org/10.1155/2021/8893944
Dobrynin VM. Effect of overburden pressure on some properties of sandstones. Society of Petroleum Engineers Journal. 1962; 2(04):360–366. https://doi.org/10.2118/461-pa
Magara K. Comparison of porosity-depth relationships of shale and sandstone. Journal of Petroleum Geology. 1980; 3(2):175–85. https://doi.org/10.1306/bf9ab5c4-0eb6-11d7-8643000102c1865d
Baud P, Zhu W, Wong T. Failure mode and weakening effect of water on sandstone. J Geophys Res Solid Earth. 2000; 105(B7):16371–16389. https://doi.org/10.1029/2000jb900087
Wong T, David C, Zhu W. The transition from brittle faulting to cataclastic flow in porous sandstones- Mechanical deformation. Journal of Geophysical Research: Solid Earth. 1997; 102(B2): 3009-3025https://doi.org/10.1029/96jb03281
Handrigan S, Nakhla S. A finite element model to study the effect of porosity location on the elastic modulus of a cantilever beam. Transactions of the Canadian Society for Mechanical Engineering. 2019; 43(4):443–53. https://doi.org/10.25071/10315/35332
Wei KK, Morrow NR, Brower KR. Effect of fluid, confining pressure, and temperature on absolute permeabilities of low- permeability sandstones. SPE Formation Evaluation. 1986; 1(04):413–423. https://doi.org/10.2118/13093-pa
Saner S, Amabeoku M, Kissami M. Formation resistivity response to loading and unloading confining pressure. J Pet Sci Eng. 1996; 16(1–3):169–179. https://doi.org/10.1016/0920-4105(96)00020-4
Alomari EM, Ng KW, Khatri L, Wulff SS. Effect of physical properties on mechanical behaviors of sandstone under uniaxial and triaxial compressions. Materials. 2023; 16(13):4867. https://doi.org/10.3390/ma16134867
Wang JC. Young’s modulus of porous materials. J Mater Sci. 1984; 19(3):801–808. https://doi.org/10.1007/BF00540451
Kovacik J. Correlation between Young’s modulus and porosity in porous materials. J Mater Sci Lett. 1999; 18(12):1007–1010. https://doi.org/10.1023/A:1006669914946
Ji S. A generalized mixture rule for estimating the viscosity of solid-liquid suspensions and mechanical properties of polyphase rocks and composite materials. J Geophys Res Solid Earth. 2004; 109(B10). https://doi.org/10.1029/2004jb003124
Jang BK, Matsubara H. Influence of porosity on hardness and Young’s modulus of nanoporous EB-PVD TBCs by nanoindentation. Mater Lett. 2005; 59(27):3462–3466. https://doi.org/10.1016/j.matlet.2005.06.014
Choren JA, Heinrich SM, Silver-Thorn MB. Young’s modulus and volume porosity relationships for additive manufacturing applications. J Mater Sci. 2013; 48(15):5103–5112. https://doi.org/10.1007/s10853-013-7237-5
Phani KK, Niyogi SK. Young’s modulus of porous brittle solids. J Mater Sci. 1987; 22(1):257–263. https://doi.org/10.1007/bf01160581
Głuchowski A, Sobol E, Szymanski A, Sas W. Undrained pore pressure development on cohesive soil in triaxial cyclic loading. Applied Sciences. 2019; 9(18):3821.
Lagerstorm PA. Laminar flow theory. Princeton University Press; 1996.
Sekucia F, Dlapa P, Kollar J, Cerda A, Hrabovsky A, Svobodova L. Land-use impact on porosity and water retention of soils rich in rock fragments. Catena. 2020; 195. https://doi.org/10.1016/j.catena.2020.104807
Zhu H, Ba J, Zhang L, Carcione JM, Yan X. Effect of temperature and fluid on rock microstructure based on an effective-medium theory. J Geophys Eng. 2024; 21(2):426–437. https://doi.org/10.1093/jge/gxae014
Wang D, Hu H, Wang T, Tang T, Li W, Zhu G, et al. Difference between of coal and shale pore structural characters based on gas adsorption experiment and multifractal analysis. Fuel. 2024; 371(B):132044. https://doi.org/10.1016/j.fuel.2024.132044
Goldsmith AS. Permeability decline and compressibility in sandstone reservoir rocks. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts. 1991; 28(1):A25. https://doi.org/10.1016/0148-9062(91)93434-8
Smits RMM, Waal JA, Kooten JFC. Prediction of abrupt reservoir compaction and surface subsidence caused by pore collapse in carbonates. SPE Formation Evaluation. 1988; 3(02):340–346. https://doi.org/10.2118/15642-PA
Fredrich JT, Deitrick GL, Arguello JG, Rouffignac EP. Reservoir compaction, surface subsidence, and casing damage: A geomechanics approach to mitigation and reservoir management. SPE/ISRM Rock Mechanics in Petroleum Engineering. 1998; 403–412. https://doi.org/10.2118/47284-ms
Hongfen Z, Xianfeng S, Erxin G, Shaoffi Z, Ruhong Z. Study on the pore structure evolution and fractal feature in the process of spontaneous combustion of coal. J Mines Met Fuels. 2017; 65(12):684–690.
Zhu Y, Wu Y, Zhang L, Zhang S. Experimental and numerical simulations of pore structures and seepage characteristics of deep sandstones. Processes. 2023; 11(12):3411. https://doi.org/10.3390/pr11123411
Wang HL, Xu WY, Cai M, Xiang ZP, Kong Q. Gas permeability and porosity evolution of a porous sandstone under repeated loading and unloading conditions. Rock Mech Rock Eng. 2017; 50(8):2071–2083. https://doi.org/10.1007/s00603-017-1215-1
Gangi AF. Variation of whole and fractured porous rock permeability with confining pressure. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts. 1978; 16(1):A6. https://doi.org/10.1016/0148-9062(79)90824-6
Ma D, Duan H, Zhang J. Solid grain migration on hydraulic properties of fault rocks in underground mining tunnel: Radial seepage experiments and verification of permeability prediction. Tunnelling and Underground Space Technology. 2022; 126:104525. https://doi.org/10.1016/j.tust.2022.104525
Ma D, Duan H, Li X, Li Z, Zhou Z, Li T. Effects of seepage-induced erosion on nonlinear hydraulic properties of broken red sandstones. Tunnelling and Underground Space Technology. 2019; 91:102993. https://doi.org/10.1016/j.tust.2019.102993
Chen X, Zhao S, Li L, Li X, Kang N. Effect of ambient pressure on gas adsorption characteristics of residual coal in abandoned underground coal mines. J Nat Gas Sci Eng. 2021; 90:103900. https://doi.org/10.1016/j.jngse.2021.103900
Tarkowski R, Uliasz-Misiak B. Towards underground hydrogen storage: A review of barriers. Renewable and Sustainable Energy Reviews. 2022; 162:112451. https://doi.org/10.1016/j.rser.2022.112451
Liu L, Fang Z, Qi C, Zhang B, Guo L, Song KI. Experimental investigation on the relationship between pore characteristics and unconfined compressive strength of cemented paste backfill. Constr Build Mater. 2018; 179:254–264. https://doi.org/10.1016/j.conbuildmat.2018.05.224