Characterization of Mechanical Properties of Coconut Coir Fibre Reinforced PLA Composites
DOI:
https://doi.org/10.18311/jmmf/2024/44563Keywords:
Biodegradable, Natural Fiber, PLAAbstract
This study examines the biodegradable and fracture toughness of Polylactic Acid (PLA) composites supplemented with coir fibres at different fibre weight fractions. Sustainable composite materials are made by combining fibres from coconut coir with PLA, a biodegradable polymer sourced from renewable resources. To improve their characteristics, the fibres are treated with sodium hydroxide, and twin-screw extrusion and injection moulding are used to create the composites. According to ASTM standards, tensile, impact, and flexural strength tests show that untreated coir fibre reinforced PLA composites have higher tensile and impact strengths than pure PLA, whereas treated fibres offer marginal increases at particular weight fractions.As fibre content rises, flexural strength often falls; untreated composites outperform treated ones in this regard. These results demonstrate the potential of PLA composites reinforced with coir fibre as greener substitutes for traditional polymers, with prospective uses in structural contexts where mechanical integrity and biodegradability are essential.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Accepted 2024-07-26
Published 2024-08-19
References
Thyavihalli G, Gowda Y, Parameswaranpillai J, et al. Natural fibers as sustainable and renewable resource for development of eco-friendly composites: A comprehensive review. Frontiers in Materials. 2019; 6: 226. https://doi.org/10.3389/fmats.2019.00226
Yu D, Ghataura A, Takagi H, et al. Polylactic acid (PLA) biocomposites reinforced with coir fibres: Evaluation of mechanical performance and multifunctional properties. Composites Part A: Applied Science and Manufacturing. 2014; 63:76-84. https://doi.org/10.1016/j.compositesa.2014.04.003
Hertzberg RW, Vinci RP, Hertzberg JL. Deformation and fracture mechanics of engineering materials. Materials and Design. 1984; 5(4):198. https://doi.org/10.1016/0261-3069(84)90070-0
Harikrishnan KR, Varma PRD, Shivakumar E. Mode I frctre toughness of jute or glass fibre hybrid composite - An experimental and numerical stud. International Journal of Engineering and Trends and Technology. 2015; 28(6):307-310. https://doi.org/10.14445/22315381/ijett-v28p259
Agarwal N, Bhargava M. Mechanical and fractue toughness analysis of woven carbon fibre reinforced epoxry composites. International Journal of Scientific Research Engineering and Technology. 2017; 6(1):17-22.
Abdullah AH, Mutalib FFA, et al. Tensile and fracture toughness properties of coconut spathe fibre reinforced epory composites: Effect of chemical treatments. Advanced Materials and Research. 2016; 1133:603-607. https://doi.org/10.4028/www.scientific.net/amr.1133.603
Sinclair A, Betelie AA, Redda DT. Experimental investigation of fracture toughness for treated sisal epoxy composite. AIMS Materials Science. 2018; 5(1):93-104. https://doi.org/10.3934/matersci.2018.1.93
Hulugappa B, Mysuru VA, Suresh B. Efect of fillers on mechanical properties and fracture toughness of glass fabric and materials. Journal of Minerals Characterization and Engineering. 2016; 4:1-14. https://doi.org/10.4236/jmmce.2016.41001
Kullayappa M, Bharathreddy CS, Bharathiraja G, Jayakumar V. Investigation on fracture toughness of treated hybrid particulate reinforced polyester composit. International Journal of Pure and Applied Mathematics. 2018; 119(12):15677-15686.
Santhanam V, Chandrasekaran M, Venkateshwaran N, Elayaperumal A. Mode I fracture toughness of banana fibre and glass fibre reinforced composites. Advanced Materials Research. 2012; 622-623:1320-1324. https://doi.org/10.4028/www.scientific.net/AMR.622-623.132
Gouda PSS, Kudari SK, Prabhuswamy S, JawaliD. Fracture toughness of glass-carbon (0/90)s fibre reinforced polymer composite - An experimental and nunerical study. Journal of Minerals and Materials Characterization and Engineering. 2011; 10(8):671-682. https://doi.org/10.4236/jmmce.2011.108052
Pires JRA, Souza VGL, Fernando AL. Production of nanocellulose from lignocellulosic biomass wastes: Prospects and limitations. Innovation, Engineering and Entrepreneurship. Springer International Publishing. 2019; 505:719–725. https://doi.org/10.1007/978-3-319-91334-6_98
Kawashima N, Yagi T, Kojima K. How do bioplastics and fossil-based plastics play in a circular economy? Macromol Mater Eng. 2019; 304:1900383. https://doi.org/10.1002/mame.201900383
Kubowicz S, Booth AM. Biodegradability of plastics: Challenges and misconceptions. Environ Sci Technol. 2017; 51(21):12058–12060. https://doi.org/10.1021/acs.est.7b04051
D570-98. Standard test method for water absorption of plastics. ASTM International; 2018.
Kumar S, Shamprasad MS, et al. Coconut coir fiber reinforced polypropylene composites: Investigation on fracture toughness and mechanical properties. Materials Today: Proceedings. 2021; 46(7):2471-2476. https://doi.org/10.1016/j.matpr.2021.01.402