Design of a Sensor Board for Underground Mines Environment Monitoring System

Jump To References Section

Authors

  • Electrical Engg. Dept., ISM Dhanbad ,IN
  • Mining Machinery Engineering Dept., ISM Dhanbad ,IN
  • Mining Engineering Department, ISM Dhanbad ,IN

Keywords:

Noxious Gases, Firedamp, Miniature Sensors, Printed Circuit Board and Underground Mines.

Abstract

In this paper a development of miniature size low power integrated sensor board for the real-time environment underground mine monitoring system is presented. Advance sensor technology has introduced high sensitivity and small size, low power sensors. At the time of mining operations, it must be required to monitor noxious/explosive gases. The whole mine environment is affected due to release or produce of those gases. If, concentration level of noxious or explosive gases exceeds the safe limit, it suddenly creates an unsafe situation. To avoid this situation continuous real-time environment monitoring is mandatory today.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-17

How to Cite

Dohare, Y. S., Maity, T., & Paul, P. S. (2022). Design of a Sensor Board for Underground Mines Environment Monitoring System. Journal of Mines, Metals and Fuels, 64(5), 271–274. Retrieved from https://informaticsjournals.com/index.php/jmmf/article/view/31530

Issue

Section

Articles

 

References

Biswas, A. (2001): Analysis of Accidents in India, Journal of Mines, Metals and Fuels, vol. 49, pp.50-57.

Misra, G. B. (1986): Mine Environment and Ventilation, Oxford University Press, pp.619.

http://dgms.gov.in/legislation.php. Retrieved at 24th June 2015.

L. V. Shum, P. Rajalakshmi, A. Afonja,G. McPhillips,R. Binions, L. Cheng,S. Hailes, (2011): “On the Development of a Sensor Module for real-time Pollution Monitoring,” IEEE International Conference on Information Science and Applications (ICISA), pp.1-9.

García Mandayo, G., Herrán, J., Castro-Hurtado, I. and Castaño, E. (2011): Performance of a CO2 Impedimetric Sensor Prototype for Air Quality Monitoring, Sensors, pp.5047-5057.

TGS 2611 - for the detection of Methane. https://www.google.co.in/?gfe_rd=cr&ei=x9qUVanJN-fI8AfxtrzICw#q=tgs2611. Retrieved at 18th April 2013.

TGS 2442 - for the detection of Carbon Monoxide (Datasheet). http://www.meditronik.com.pl/doc/b0-b9999/tgs2442.pdf. Retrieved at 30th June 2013.

Technical information for TGS4161. http://www.netzmafia.de/skripten/hardware/Datenblaetter/Gassensoren/TGS4161Dtl.pdf. Retrieved at 20th June 2014.

AN9003 - A Users Guide to Intrinsic Safety. http://www.mtlint.com/images/uploads/datasheets/App_Notes/AN9003.pdf. Retrieved on 10th March 2014.

Most read articles by the same author(s)

1 2 > >>