An Investigation of Mine Accident/Incident Data and Implementation of Safety Management System to Minimize the Risk in a Trackless Underground Hard Rock Mine

Jump To References Section

Authors

  • PhD Scholar, Department of Mining Engineering, Indian School of Mines, Dhanbad ,IN
  • Assistant Professor, Department of Mining Engineering, Indian School of Mines, Dhanbad ,IN
  • M.Tech (Opencast Mining) Student, Department of Mining Engineering, Indian School of Mines, Dhanbad ,IN

Keywords:

No Keywords.

Abstract

Investigations of accidents/incidents are very essential prerequisite to enhance the mine safety. In this paper, a comprehensive study of accident/injury data of a trackless underground hard rock mine was performed. The case study outcomes exhibited that the job occupation categories; the miners/helpers, timbermans, tradesmen involved in maintenance jobs and operators’ (DSSLM) injuries are frequent and severe. The major causes of their injuries are fall of persons on same level. However, fall-of-loose-rock, caught-in-between, hitting-with-an-object etc. related accidents are also foremost safety problems in the mine studied. Therefore, a systematic approach is needed to evaluate the risk at different operation in case study mine using suitable multivariate statistical tools. In addition, proactive management efforts is also required to improve the characteristics of the hazardous work environment through suitable control measures to enhance the safety in underground hard rock mines.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-16

How to Cite

Sarkar, F., Paul, P. S., & Kumar, P. P. (2022). An Investigation of Mine Accident/Incident Data and Implementation of Safety Management System to Minimize the Risk in a Trackless Underground Hard Rock Mine. Journal of Mines, Metals and Fuels, 64(4), 80–85. Retrieved from https://informaticsjournals.com/index.php/jmmf/article/view/31472

Issue

Section

Articles

 

References

Apex OH&S Manual, Occupational Health & Safety Management System (2015): IS 18001:2007 Edition 4 of case study mine

Ary, T. S. (1989): “Productivity and Safety,” American Mining Congress Journal, Vol. 75, No.9, pp. 14-15.

Directorate General of Mines Safety (DGMS) (2014): “Standard Note,” Dhanbad

Mitchell, R. J., Driscoll, T. R. et al. (1998): “Traumatic Work-related Fatalities Involving Mining in Australia.” Safety Science, 29(2), 107-123.

Paul, P. S. and Maiti, J. M. (2001): “Mine Accident Data Analysis (MADA) for Identifying Countermeasures towards Better Safety Performance”, The Indian Mining and Engineering Journal, vol.40, No.12, pp.47-53.

Procedure (Level–II Document) Occupational Health & Safety Management System (2015), IS 18001:2007 Edition 4 of case study mine.

Similar Articles

1 2 3 4 5 6 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)